···
Candle arm of candle crown, Candle arm belonging to a candle crown of three heights with Marian chapel in the center. The arm is bent twice and has eleven leaves. At the end rests the grease trap, which has a vertical jagged edge with cruciferous motifs on the underside. The candle holder is hexagonal with a perforated side on the front and back and has a vertical ring-shaped lower part. This is the fourth arm of the lower ring (base), numbered with 4 dots., maker: anonymous, Southern Netherlands, c. 1475 - c. 1485, brass (alloy), casting, width 26.0 cm × height 26.0 cm, diameter 10.0 cm Image details File size:
33.2 MB (559.9 KB Compressed download)
Open your image file to the full size using image processing software.
Dimensions:
3098 x 3750 px | 26.2 x 31.8 cm | 10.3 x 12.5 inches | 300dpi
More information:
This image could have imperfections as it’s either historical or reportage.
Search stock photos by tags
Similar stock images Arm with candle holder made of candle crown of three heights, Candle arm belonging to a brass candle crown of three heights. The S-shaped arm has a curl and merges outwards into the flat bulge with a screw hole. The candle holder with the fat trap is fixed in it. The fat trap is ribbed on the underside profiled around the opening and furthermore has two grooved rings and a single grooved ring. The cylindrical candle holder, which has a profiled protruding edge, two grooved rings and a thickening at the bottom, becomes a baluster. This is the sixth arm of the middle stand ring, unnumbered Stock Photo https://www.alamy.com/image-license-details/?v=1 https://www.alamy.com/arm-with-candle-holder-made-of-candle-crown-of-three-heights-candle-arm-belonging-to-a-brass-candle-crown-of-three-heights-the-s-shaped-arm-has-a-curl-and-merges-outwards-into-the-flat-bulge-with-a-screw-hole-the-candle-holder-with-the-fat-trap-is-fixed-in-it-the-fat-trap-is-ribbed-on-the-underside-profiled-around-the-opening-and-furthermore-has-two-grooved-rings-and-a-single-grooved-ring-the-cylindrical-candle-holder-which-has-a-profiled-protruding-edge-two-grooved-rings-and-a-thickening-at-the-bottom-becomes-a-baluster-this-is-the-sixth-arm-of-the-middle-stand-ring-unnumbered-image261367614.html RM W5691J – Arm with candle holder made of candle crown of three heights, Candle arm belonging to a brass candle crown of three heights. The S-shaped arm has a curl and merges outwards into the flat bulge with a screw hole. The candle holder with the fat trap is fixed in it. The fat trap is ribbed on the underside profiled around the opening and furthermore has two grooved rings and a single grooved ring. The cylindrical candle holder, which has a profiled protruding edge, two grooved rings and a thickening at the bottom, becomes a baluster. This is the sixth arm of the middle stand ring, unnumbered Inspired by Candle arm of candle crown, Candle arm belonging to a candle crown of three heights with Mary chapel in the center. The arm is bent twice and has eleven leaves. At the end rests the grease trap, which has a vertical jagged edge with cruciferous motifs on the underside. The candle holder, Reimagined by Artotop. Classic art reinvented with a modern twist. Design of warm cheerful glowing of brightness and light ray radiance. Photography inspired by surrealism and futurism, embracing dynamic energy of modern technology, movement, speed and revolutionize culture Stock Photo https://www.alamy.com/image-license-details/?v=1 https://www.alamy.com/inspired-by-candle-arm-of-candle-crown-candle-arm-belonging-to-a-candle-crown-of-three-heights-with-mary-chapel-in-the-center-the-arm-is-bent-twice-and-has-eleven-leaves-at-the-end-rests-the-grease-trap-which-has-a-vertical-jagged-edge-with-cruciferous-motifs-on-the-underside-the-candle-holder-reimagined-by-artotop-classic-art-reinvented-with-a-modern-twist-design-of-warm-cheerful-glowing-of-brightness-and-light-ray-radiance-photography-inspired-by-surrealism-and-futurism-embracing-dynamic-energy-of-modern-technology-movement-speed-and-revolutionize-culture-image459393234.html RF 2HKB4N6 – Inspired by Candle arm of candle crown, Candle arm belonging to a candle crown of three heights with Mary chapel in the center. The arm is bent twice and has eleven leaves. At the end rests the grease trap, which has a vertical jagged edge with cruciferous motifs on the underside. The candle holder, Reimagined by Artotop. Classic art reinvented with a modern twist. Design of warm cheerful glowing of brightness and light ray radiance. Photography inspired by surrealism and futurism, embracing dynamic energy of modern technology, movement, speed and revolutionize culture Arm with candle holder of candle crown of two heights with eight arms each, c. 1525 - c. 1550 Candle arm belonging to a candle crown of two heights with maria figure at the top. The arm is bent twice and is decorated with four grapes bunches and five vine leaves. The round fat catcher is decorated with fish bladder motifs at the bottom and has an excellent edge of cross flowers towards the middle, which masks the placement on the arm. The candle holder is six -flat, opened, placed on three vertical styles, transferring to a threaded protrusion. This is the eighth arm of the upper ring, unnumbe Stock Photo https://www.alamy.com/image-license-details/?v=1 https://www.alamy.com/arm-with-candle-holder-of-candle-crown-of-two-heights-with-eight-arms-each-c-1525-c-1550-candle-arm-belonging-to-a-candle-crown-of-two-heights-with-maria-figure-at-the-top-the-arm-is-bent-twice-and-is-decorated-with-four-grapes-bunches-and-five-vine-leaves-the-round-fat-catcher-is-decorated-with-fish-bladder-motifs-at-the-bottom-and-has-an-excellent-edge-of-cross-flowers-towards-the-middle-which-masks-the-placement-on-the-arm-the-candle-holder-is-six-flat-opened-placed-on-three-vertical-styles-transferring-to-a-threaded-protrusion-this-is-the-eighth-arm-of-the-upper-ring-unnumbe-image576353021.html RM 2TDK44D – Arm with candle holder of candle crown of two heights with eight arms each, c. 1525 - c. 1550 Candle arm belonging to a candle crown of two heights with maria figure at the top. The arm is bent twice and is decorated with four grapes bunches and five vine leaves. The round fat catcher is decorated with fish bladder motifs at the bottom and has an excellent edge of cross flowers towards the middle, which masks the placement on the arm. The candle holder is six -flat, opened, placed on three vertical styles, transferring to a threaded protrusion. This is the eighth arm of the upper ring, unnumbe Arm with candleholder made of candle crown of three heights, Candle arm belonging to a brass candle crown of three heights. The S-shaped arm has a curl and merges outwards into the flat bulge with a screw hole. The candle holder with the fat trap is fixed in it. The small fat trap is ribbed on the underside profiled around the opening and furthermore has two grooved rings twice. The cylindrical candle holder, which has a profiled protruding edge, two grooved rings and a thickening at the bottom, becomes a baluster with a threaded end at the bottom. This is the fourth arm of the lower stand Stock Photo https://www.alamy.com/image-license-details/?v=1 https://www.alamy.com/arm-with-candleholder-made-of-candle-crown-of-three-heights-candle-arm-belonging-to-a-brass-candle-crown-of-three-heights-the-s-shaped-arm-has-a-curl-and-merges-outwards-into-the-flat-bulge-with-a-screw-hole-the-candle-holder-with-the-fat-trap-is-fixed-in-it-the-small-fat-trap-is-ribbed-on-the-underside-profiled-around-the-opening-and-furthermore-has-two-grooved-rings-twice-the-cylindrical-candle-holder-which-has-a-profiled-protruding-edge-two-grooved-rings-and-a-thickening-at-the-bottom-becomes-a-baluster-with-a-threaded-end-at-the-bottom-this-is-the-fourth-arm-of-the-lower-stand-image261367687.html RM W56947 – Arm with candleholder made of candle crown of three heights, Candle arm belonging to a brass candle crown of three heights. The S-shaped arm has a curl and merges outwards into the flat bulge with a screw hole. The candle holder with the fat trap is fixed in it. The small fat trap is ribbed on the underside profiled around the opening and furthermore has two grooved rings twice. The cylindrical candle holder, which has a profiled protruding edge, two grooved rings and a thickening at the bottom, becomes a baluster with a threaded end at the bottom. This is the fourth arm of the lower stand Inspired by Candle arm of candle crown, Candle arm belonging to a candle crown of three heights with Marian chapel in the center. The arm is bent twice and has eleven leaves. At the end rests the grease trap, which has a vertical jagged edge with cruciferous motifs on the underside. The candle holder, Reimagined by Artotop. Classic art reinvented with a modern twist. Design of warm cheerful glowing of brightness and light ray radiance. Photography inspired by surrealism and futurism, embracing dynamic energy of modern technology, movement, speed and revolutionize culture Stock Photo https://www.alamy.com/image-license-details/?v=1 https://www.alamy.com/inspired-by-candle-arm-of-candle-crown-candle-arm-belonging-to-a-candle-crown-of-three-heights-with-marian-chapel-in-the-center-the-arm-is-bent-twice-and-has-eleven-leaves-at-the-end-rests-the-grease-trap-which-has-a-vertical-jagged-edge-with-cruciferous-motifs-on-the-underside-the-candle-holder-reimagined-by-artotop-classic-art-reinvented-with-a-modern-twist-design-of-warm-cheerful-glowing-of-brightness-and-light-ray-radiance-photography-inspired-by-surrealism-and-futurism-embracing-dynamic-energy-of-modern-technology-movement-speed-and-revolutionize-culture-image459393206.html RF 2HKB4M6 – Inspired by Candle arm of candle crown, Candle arm belonging to a candle crown of three heights with Marian chapel in the center. The arm is bent twice and has eleven leaves. At the end rests the grease trap, which has a vertical jagged edge with cruciferous motifs on the underside. The candle holder, Reimagined by Artotop. Classic art reinvented with a modern twist. Design of warm cheerful glowing of brightness and light ray radiance. Photography inspired by surrealism and futurism, embracing dynamic energy of modern technology, movement, speed and revolutionize culture Arm with candle holder of candle crown of two heights with eight arms each, c. 1525 - c. 1550 Candle arm belonging to a candle crown of two heights with maria figure at the top. The arm is bent twice and is decorated with four grapes bunches and five vine leaves. The round fat catcher is decorated with fish bladder motifs at the bottom and has an excellent edge of cross flowers towards the middle, which masks the placement on the arm. The candle holder is six -flat, opened, placed on three vertical styles, transferring to a threaded protrusion. This is the second arm of the upper ring, numbere Stock Photo https://www.alamy.com/image-license-details/?v=1 https://www.alamy.com/arm-with-candle-holder-of-candle-crown-of-two-heights-with-eight-arms-each-c-1525-c-1550-candle-arm-belonging-to-a-candle-crown-of-two-heights-with-maria-figure-at-the-top-the-arm-is-bent-twice-and-is-decorated-with-four-grapes-bunches-and-five-vine-leaves-the-round-fat-catcher-is-decorated-with-fish-bladder-motifs-at-the-bottom-and-has-an-excellent-edge-of-cross-flowers-towards-the-middle-which-masks-the-placement-on-the-arm-the-candle-holder-is-six-flat-opened-placed-on-three-vertical-styles-transferring-to-a-threaded-protrusion-this-is-the-second-arm-of-the-upper-ring-numbere-image576353035.html RM 2TDK44Y – Arm with candle holder of candle crown of two heights with eight arms each, c. 1525 - c. 1550 Candle arm belonging to a candle crown of two heights with maria figure at the top. The arm is bent twice and is decorated with four grapes bunches and five vine leaves. The round fat catcher is decorated with fish bladder motifs at the bottom and has an excellent edge of cross flowers towards the middle, which masks the placement on the arm. The candle holder is six -flat, opened, placed on three vertical styles, transferring to a threaded protrusion. This is the second arm of the upper ring, numbere Arm with candleholder of three-height candle crown, Candle arm belonging to a brass candle crown of three heights. The S-shaped arm has a curl and merges outwards into the flat bulge with a screw hole. The candle holder with the fat trap is fixed in it. The fat trap is ribbed on the underside profiled around the opening and furthermore has two grooved rings twice. The cylindrical candle holder, which has a profiled protruding rim, two grooved rings and a thickening at the bottom, merges into a baluster with a threaded bottom end and a knob in which the center hole can be seen. This is Stock Photo https://www.alamy.com/image-license-details/?v=1 https://www.alamy.com/arm-with-candleholder-of-three-height-candle-crown-candle-arm-belonging-to-a-brass-candle-crown-of-three-heights-the-s-shaped-arm-has-a-curl-and-merges-outwards-into-the-flat-bulge-with-a-screw-hole-the-candle-holder-with-the-fat-trap-is-fixed-in-it-the-fat-trap-is-ribbed-on-the-underside-profiled-around-the-opening-and-furthermore-has-two-grooved-rings-twice-the-cylindrical-candle-holder-which-has-a-profiled-protruding-rim-two-grooved-rings-and-a-thickening-at-the-bottom-merges-into-a-baluster-with-a-threaded-bottom-end-and-a-knob-in-which-the-center-hole-can-be-seen-this-is-image261367669.html RM W5693H – Arm with candleholder of three-height candle crown, Candle arm belonging to a brass candle crown of three heights. The S-shaped arm has a curl and merges outwards into the flat bulge with a screw hole. The candle holder with the fat trap is fixed in it. The fat trap is ribbed on the underside profiled around the opening and furthermore has two grooved rings twice. The cylindrical candle holder, which has a profiled protruding rim, two grooved rings and a thickening at the bottom, merges into a baluster with a threaded bottom end and a knob in which the center hole can be seen. This is Inspired by Candle arm of candle crown, Candle arm belonging to a candle crown of three heights with Marian chapel in the center. The arm is bent twice and has eleven leaves. At the end rests the grease trap, which has a vertical jagged edge with cruciferous motifs on the underside. The candle holder, Reimagined by Artotop. Classic art reinvented with a modern twist. Design of warm cheerful glowing of brightness and light ray radiance. Photography inspired by surrealism and futurism, embracing dynamic energy of modern technology, movement, speed and revolutionize culture Stock Photo https://www.alamy.com/image-license-details/?v=1 https://www.alamy.com/inspired-by-candle-arm-of-candle-crown-candle-arm-belonging-to-a-candle-crown-of-three-heights-with-marian-chapel-in-the-center-the-arm-is-bent-twice-and-has-eleven-leaves-at-the-end-rests-the-grease-trap-which-has-a-vertical-jagged-edge-with-cruciferous-motifs-on-the-underside-the-candle-holder-reimagined-by-artotop-classic-art-reinvented-with-a-modern-twist-design-of-warm-cheerful-glowing-of-brightness-and-light-ray-radiance-photography-inspired-by-surrealism-and-futurism-embracing-dynamic-energy-of-modern-technology-movement-speed-and-revolutionize-culture-image459393175.html RF 2HKB4K3 – Inspired by Candle arm of candle crown, Candle arm belonging to a candle crown of three heights with Marian chapel in the center. The arm is bent twice and has eleven leaves. At the end rests the grease trap, which has a vertical jagged edge with cruciferous motifs on the underside. The candle holder, Reimagined by Artotop. Classic art reinvented with a modern twist. Design of warm cheerful glowing of brightness and light ray radiance. Photography inspired by surrealism and futurism, embracing dynamic energy of modern technology, movement, speed and revolutionize culture Arm with candle holder of candle crown of two heights with eight arms each, c. 1525 - c. 1550 Candle arm belonging to a candle crown of two heights with maria figure at the top. The arm is bent twice and is decorated with four grapes bunches and five vine leaves. The round fat catcher is decorated with fish bladder motifs at the bottom and has an excellent edge of cross flowers towards the middle, which masks the placement on the arm. The candle holder is six -flat, opened, placed on three vertical styles, transferring to a threaded protrusion. This is the seventh arm of the upper ring, number Stock Photo https://www.alamy.com/image-license-details/?v=1 https://www.alamy.com/arm-with-candle-holder-of-candle-crown-of-two-heights-with-eight-arms-each-c-1525-c-1550-candle-arm-belonging-to-a-candle-crown-of-two-heights-with-maria-figure-at-the-top-the-arm-is-bent-twice-and-is-decorated-with-four-grapes-bunches-and-five-vine-leaves-the-round-fat-catcher-is-decorated-with-fish-bladder-motifs-at-the-bottom-and-has-an-excellent-edge-of-cross-flowers-towards-the-middle-which-masks-the-placement-on-the-arm-the-candle-holder-is-six-flat-opened-placed-on-three-vertical-styles-transferring-to-a-threaded-protrusion-this-is-the-seventh-arm-of-the-upper-ring-number-image576353066.html RM 2TDK462 – Arm with candle holder of candle crown of two heights with eight arms each, c. 1525 - c. 1550 Candle arm belonging to a candle crown of two heights with maria figure at the top. The arm is bent twice and is decorated with four grapes bunches and five vine leaves. The round fat catcher is decorated with fish bladder motifs at the bottom and has an excellent edge of cross flowers towards the middle, which masks the placement on the arm. The candle holder is six -flat, opened, placed on three vertical styles, transferring to a threaded protrusion. This is the seventh arm of the upper ring, number Arm with candleholder made of candle crown of three heights, Candle arm belonging to a brass candle crown of three heights. The S-shaped arm has a curl and merges outwards into the flat bulge with a screw hole. The candle holder with the fat trap is fixed in it. The fat trap is ribbed on the underside profiled around the opening and furthermore has two grooved rings twice. The cylindrical candle holder, which has a profiled protruding rim, two grooved rings and a thickening at the bottom, merges into a baluster with a threaded bottom end and a knob in which the center hole can be seen. This is Stock Photo https://www.alamy.com/image-license-details/?v=1 https://www.alamy.com/arm-with-candleholder-made-of-candle-crown-of-three-heights-candle-arm-belonging-to-a-brass-candle-crown-of-three-heights-the-s-shaped-arm-has-a-curl-and-merges-outwards-into-the-flat-bulge-with-a-screw-hole-the-candle-holder-with-the-fat-trap-is-fixed-in-it-the-fat-trap-is-ribbed-on-the-underside-profiled-around-the-opening-and-furthermore-has-two-grooved-rings-twice-the-cylindrical-candle-holder-which-has-a-profiled-protruding-rim-two-grooved-rings-and-a-thickening-at-the-bottom-merges-into-a-baluster-with-a-threaded-bottom-end-and-a-knob-in-which-the-center-hole-can-be-seen-this-is-image261367611.html RM W5691F – Arm with candleholder made of candle crown of three heights, Candle arm belonging to a brass candle crown of three heights. The S-shaped arm has a curl and merges outwards into the flat bulge with a screw hole. The candle holder with the fat trap is fixed in it. The fat trap is ribbed on the underside profiled around the opening and furthermore has two grooved rings twice. The cylindrical candle holder, which has a profiled protruding rim, two grooved rings and a thickening at the bottom, merges into a baluster with a threaded bottom end and a knob in which the center hole can be seen. This is Inspired by Candle arm of candle crown, Candle arm belonging to a candle crown of three heights with Marian chapel in the center. The arm is bent twice and has eleven leaves. At the end rests the grease trap, which has a vertical jagged edge with cruciferous motifs on the underside. The candle holder, Reimagined by Artotop. Classic art reinvented with a modern twist. Design of warm cheerful glowing of brightness and light ray radiance. Photography inspired by surrealism and futurism, embracing dynamic energy of modern technology, movement, speed and revolutionize culture Stock Photo https://www.alamy.com/image-license-details/?v=1 https://www.alamy.com/inspired-by-candle-arm-of-candle-crown-candle-arm-belonging-to-a-candle-crown-of-three-heights-with-marian-chapel-in-the-center-the-arm-is-bent-twice-and-has-eleven-leaves-at-the-end-rests-the-grease-trap-which-has-a-vertical-jagged-edge-with-cruciferous-motifs-on-the-underside-the-candle-holder-reimagined-by-artotop-classic-art-reinvented-with-a-modern-twist-design-of-warm-cheerful-glowing-of-brightness-and-light-ray-radiance-photography-inspired-by-surrealism-and-futurism-embracing-dynamic-energy-of-modern-technology-movement-speed-and-revolutionize-culture-image459393188.html RF 2HKB4KG – Inspired by Candle arm of candle crown, Candle arm belonging to a candle crown of three heights with Marian chapel in the center. The arm is bent twice and has eleven leaves. At the end rests the grease trap, which has a vertical jagged edge with cruciferous motifs on the underside. The candle holder, Reimagined by Artotop. Classic art reinvented with a modern twist. Design of warm cheerful glowing of brightness and light ray radiance. Photography inspired by surrealism and futurism, embracing dynamic energy of modern technology, movement, speed and revolutionize culture Arm with candle holder of candle crown of two heights with eight arms each, c. 1525 - c. 1550 Candle arm belonging to a candle crown of two heights with maria figure at the top. The arm is bent twice and is decorated with four grapes bunches and five vine leaves. The round fat catcher is decorated with fish bladder motifs at the bottom and has an excellent edge of cross flowers towards the middle, which masks the placement on the arm. The candle holder is six -flat, opened, placed on three vertical styles, transferring to a threaded protrusion. This is the first arm of the upper ring, numbered Stock Photo https://www.alamy.com/image-license-details/?v=1 https://www.alamy.com/arm-with-candle-holder-of-candle-crown-of-two-heights-with-eight-arms-each-c-1525-c-1550-candle-arm-belonging-to-a-candle-crown-of-two-heights-with-maria-figure-at-the-top-the-arm-is-bent-twice-and-is-decorated-with-four-grapes-bunches-and-five-vine-leaves-the-round-fat-catcher-is-decorated-with-fish-bladder-motifs-at-the-bottom-and-has-an-excellent-edge-of-cross-flowers-towards-the-middle-which-masks-the-placement-on-the-arm-the-candle-holder-is-six-flat-opened-placed-on-three-vertical-styles-transferring-to-a-threaded-protrusion-this-is-the-first-arm-of-the-upper-ring-numbered-image576353075.html RM 2TDK46B – Arm with candle holder of candle crown of two heights with eight arms each, c. 1525 - c. 1550 Candle arm belonging to a candle crown of two heights with maria figure at the top. The arm is bent twice and is decorated with four grapes bunches and five vine leaves. The round fat catcher is decorated with fish bladder motifs at the bottom and has an excellent edge of cross flowers towards the middle, which masks the placement on the arm. The candle holder is six -flat, opened, placed on three vertical styles, transferring to a threaded protrusion. This is the first arm of the upper ring, numbered Arm with candle holder made of candle crown of three heights, Candle arm belonging to a brass candle crown of three heights. The S-shaped arm has a curl and merges outwards into the flat bulge with a screw hole. The candle holder with the fat trap is fixed in it. The fat trap is ribbed on the underside profiled around the opening and furthermore has two grooved rings and a single grooved ring. The cylindrical candle holder, which has a profiled protruding rim, two grooved rings and a thickening at the bottom, turns into a baluster with a threaded bottom end with a flat underside. This is Stock Photo https://www.alamy.com/image-license-details/?v=1 https://www.alamy.com/arm-with-candle-holder-made-of-candle-crown-of-three-heights-candle-arm-belonging-to-a-brass-candle-crown-of-three-heights-the-s-shaped-arm-has-a-curl-and-merges-outwards-into-the-flat-bulge-with-a-screw-hole-the-candle-holder-with-the-fat-trap-is-fixed-in-it-the-fat-trap-is-ribbed-on-the-underside-profiled-around-the-opening-and-furthermore-has-two-grooved-rings-and-a-single-grooved-ring-the-cylindrical-candle-holder-which-has-a-profiled-protruding-rim-two-grooved-rings-and-a-thickening-at-the-bottom-turns-into-a-baluster-with-a-threaded-bottom-end-with-a-flat-underside-this-is-image261367609.html RM W5691D – Arm with candle holder made of candle crown of three heights, Candle arm belonging to a brass candle crown of three heights. The S-shaped arm has a curl and merges outwards into the flat bulge with a screw hole. The candle holder with the fat trap is fixed in it. The fat trap is ribbed on the underside profiled around the opening and furthermore has two grooved rings and a single grooved ring. The cylindrical candle holder, which has a profiled protruding rim, two grooved rings and a thickening at the bottom, turns into a baluster with a threaded bottom end with a flat underside. This is