···
Model of a Two-Blade Parabolic Propeller, Model of a two-blade parabolic propeller in a frame on a floorboard. The pressure surface of the propeller blades is curved in the form of a parabola. The screw probably does not belong in this frame, which can hold a much larger screw. The model has a diameter of 85 mm, the hub has a diameter of 8 mm and is probably too long in relation to the actual size to fit in the frame. 1:20 scale (derived)., anonymous, 1844 and/or c. 1850, wood (plant material), brass (alloy), h 18 cm × w 14.2 cm × d 9.1 cm, Reimagined by Gibon, design of warm cheerful glowing Image details File size:
115.2 MB (1.4 MB Compressed download)
Open your image file to the full size using image processing software.
Dimensions:
7333 x 5491 px | 62.1 x 46.5 cm | 24.4 x 18.3 inches | 300dpi
More information:
This image could have imperfections as it’s either historical or reportage.
Search stock photos by tags
Similar stock images Model of a Two-Blade Parabolic Propeller, Model of a two-blade parabolic propeller in a frame on a floorboard. The pressure surface of the propeller blades is curved in the form of a parabola. The screw can be turned with a crank. The model has a pitch of 286 mm, a diameter of 200 mm, the hub is 75 mm long and has a diameter of 26 mm. 1:10 scale (derived)., Petrus van der Loo (attributed to), c. 1847, wood (plant material), h 26 cm × w 20.5 cm × d 15 cm Stock Photo https://www.alamy.com/image-license-details/?v=1 https://www.alamy.com/model-of-a-two-blade-parabolic-propeller-model-of-a-two-blade-parabolic-propeller-in-a-frame-on-a-floorboard-the-pressure-surface-of-the-propeller-blades-is-curved-in-the-form-of-a-parabola-the-screw-can-be-turned-with-a-crank-the-model-has-a-pitch-of-286-mm-a-diameter-of-200-mm-the-hub-is-75-mm-long-and-has-a-diameter-of-26-mm-110-scale-derived-petrus-van-der-loo-attributed-to-c-1847-wood-plant-material-h-26-cm-w-205-cm-d-15-cm-image261381598.html RM W56XW2 – Model of a Two-Blade Parabolic Propeller, Model of a two-blade parabolic propeller in a frame on a floorboard. The pressure surface of the propeller blades is curved in the form of a parabola. The screw can be turned with a crank. The model has a pitch of 286 mm, a diameter of 200 mm, the hub is 75 mm long and has a diameter of 26 mm. 1:10 scale (derived)., Petrus van der Loo (attributed to), c. 1847, wood (plant material), h 26 cm × w 20.5 cm × d 15 cm Model of a Two-Blade Parabolic Propeller, Petrus van der Loo (attributed to), c. 1847 instruction model Model of a two -leaf parabolic screw in a frame on a ground board. The pressure surface of the screw blades is bent in the form of a parabolic. The screw can be turned around with a crank. The model has an emergency of 286 mm, a diameter of 200 mm, the hub is 75 mm long and has a diameter of 26 mm. Scale 1:10 (derived). model maker: The Hagueafter design by: United Kingdom wood (plant material) Stock Photo https://www.alamy.com/image-license-details/?v=1 https://www.alamy.com/model-of-a-two-blade-parabolic-propeller-petrus-van-der-loo-attributed-to-c-1847-instruction-model-model-of-a-two-leaf-parabolic-screw-in-a-frame-on-a-ground-board-the-pressure-surface-of-the-screw-blades-is-bent-in-the-form-of-a-parabolic-the-screw-can-be-turned-around-with-a-crank-the-model-has-an-emergency-of-286-mm-a-diameter-of-200-mm-the-hub-is-75-mm-long-and-has-a-diameter-of-26-mm-scale-110-derived-model-maker-the-hagueafter-design-by-united-kingdom-wood-plant-material-image590720343.html RM 2W91HR3 – Model of a Two-Blade Parabolic Propeller, Petrus van der Loo (attributed to), c. 1847 instruction model Model of a two -leaf parabolic screw in a frame on a ground board. The pressure surface of the screw blades is bent in the form of a parabolic. The screw can be turned around with a crank. The model has an emergency of 286 mm, a diameter of 200 mm, the hub is 75 mm long and has a diameter of 26 mm. Scale 1:10 (derived). model maker: The Hagueafter design by: United Kingdom wood (plant material) Model of a Two-Blade Parabolic Propeller, Model of a two-blade parabolic propeller in a frame on a floorboard. The pressure surface of the propeller blades is curved in the form of a parabola. The screw probably does not belong in this frame, which can hold a much larger screw. The model has a diameter of 85 mm, the hub has a diameter of 8 mm and is probably too long in relation to the actual size to fit in the frame. 1:20 scale (derived)., anonymous, 1844 and/or c. 1850, wood (plant material), brass (alloy), h 18 cm × w 14.2 cm × d 9.1 cm Stock Photo https://www.alamy.com/image-license-details/?v=1 https://www.alamy.com/model-of-a-two-blade-parabolic-propeller-model-of-a-two-blade-parabolic-propeller-in-a-frame-on-a-floorboard-the-pressure-surface-of-the-propeller-blades-is-curved-in-the-form-of-a-parabola-the-screw-probably-does-not-belong-in-this-frame-which-can-hold-a-much-larger-screw-the-model-has-a-diameter-of-85-mm-the-hub-has-a-diameter-of-8-mm-and-is-probably-too-long-in-relation-to-the-actual-size-to-fit-in-the-frame-120-scale-derived-anonymous-1844-andor-c-1850-wood-plant-material-brass-alloy-h-18-cm-w-142-cm-d-91-cm-image261381604.html RM W56XW8 – Model of a Two-Blade Parabolic Propeller, Model of a two-blade parabolic propeller in a frame on a floorboard. The pressure surface of the propeller blades is curved in the form of a parabola. The screw probably does not belong in this frame, which can hold a much larger screw. The model has a diameter of 85 mm, the hub has a diameter of 8 mm and is probably too long in relation to the actual size to fit in the frame. 1:20 scale (derived)., anonymous, 1844 and/or c. 1850, wood (plant material), brass (alloy), h 18 cm × w 14.2 cm × d 9.1 cm Model of a Two-Blade Parabolic Propeller, Model of a two-blade parabolic propeller in a frame on a floorboard. The pressure surface of the propeller blades is curved in the form of a parabola. The screw can be turned with a crank. The model has a pitch of 286 mm, a diameter of 200 mm, the hub is 75 mm long and has a diameter of 26 mm. 1:10 scale (derived)., Petrus van der Loo (attributed to), c. 1847, wood (plant material), h 26 cm × w 20.5 cm × d 15 cm, Reimagined by Gibon, design of warm cheerful glowing of brightness and light rays radiance. Classic art reinvented with a modern twist. Photo Stock Photo https://www.alamy.com/image-license-details/?v=1 https://www.alamy.com/model-of-a-two-blade-parabolic-propeller-model-of-a-two-blade-parabolic-propeller-in-a-frame-on-a-floorboard-the-pressure-surface-of-the-propeller-blades-is-curved-in-the-form-of-a-parabola-the-screw-can-be-turned-with-a-crank-the-model-has-a-pitch-of-286-mm-a-diameter-of-200-mm-the-hub-is-75-mm-long-and-has-a-diameter-of-26-mm-110-scale-derived-petrus-van-der-loo-attributed-to-c-1847-wood-plant-material-h-26-cm-w-205-cm-d-15-cm-reimagined-by-gibon-design-of-warm-cheerful-glowing-of-brightness-and-light-rays-radiance-classic-art-reinvented-with-a-modern-twist-photo-image349985028.html RF 2B9B5D8 – Model of a Two-Blade Parabolic Propeller, Model of a two-blade parabolic propeller in a frame on a floorboard. The pressure surface of the propeller blades is curved in the form of a parabola. The screw can be turned with a crank. The model has a pitch of 286 mm, a diameter of 200 mm, the hub is 75 mm long and has a diameter of 26 mm. 1:10 scale (derived)., Petrus van der Loo (attributed to), c. 1847, wood (plant material), h 26 cm × w 20.5 cm × d 15 cm, Reimagined by Gibon, design of warm cheerful glowing of brightness and light rays radiance. Classic art reinvented with a modern twist. Photo Model of a Two-Blade Parabolic Propeller, anonymous, c. 1850 presentation model Model of a two -leaf parabolic screw in a frame on a ground board. The pressure surface of the screw blades is bent in the form of a parabolic. The screw probably does not belong in this frame, where a much larger screw can enter. The model has a diameter of 85 mm, the hub has a diameter of 8 mm and is probably too long in relation to the true size to fit into the frame. Scale 1:20 (derived). model maker: Netherlandsafter design by: United Kingdom wood (plant material). brass (alloy) Stock Photo https://www.alamy.com/image-license-details/?v=1 https://www.alamy.com/model-of-a-two-blade-parabolic-propeller-anonymous-c-1850-presentation-model-model-of-a-two-leaf-parabolic-screw-in-a-frame-on-a-ground-board-the-pressure-surface-of-the-screw-blades-is-bent-in-the-form-of-a-parabolic-the-screw-probably-does-not-belong-in-this-frame-where-a-much-larger-screw-can-enter-the-model-has-a-diameter-of-85-mm-the-hub-has-a-diameter-of-8-mm-and-is-probably-too-long-in-relation-to-the-true-size-to-fit-into-the-frame-scale-120-derived-model-maker-netherlandsafter-design-by-united-kingdom-wood-plant-material-brass-alloy-image590720354.html RM 2W91HRE – Model of a Two-Blade Parabolic Propeller, anonymous, c. 1850 presentation model Model of a two -leaf parabolic screw in a frame on a ground board. The pressure surface of the screw blades is bent in the form of a parabolic. The screw probably does not belong in this frame, where a much larger screw can enter. The model has a diameter of 85 mm, the hub has a diameter of 8 mm and is probably too long in relation to the true size to fit into the frame. Scale 1:20 (derived). model maker: Netherlandsafter design by: United Kingdom wood (plant material). brass (alloy) Model of a trunk engine, Model of a Trunk Engine, Model of a 150 hp trunk machine or tubular machine placed in a cross section of a ship. No boiler, the propeller shaft is shortened and provided with a two-blade parabolic propeller, the machine can be turned with a crank. The model shows: two horizontal cylinders with tubes, condenser cabinet with four air pumps, two steam valves with double eccentric on the crankshaft and regulator on top of the condenser, steam supply controller on extra eccentric. In this directly working machine, designed by John Penn, the piston was provided with a round Stock Photo https://www.alamy.com/image-license-details/?v=1 https://www.alamy.com/model-of-a-trunk-engine-model-of-a-trunk-engine-model-of-a-150-hp-trunk-machine-or-tubular-machine-placed-in-a-cross-section-of-a-ship-no-boiler-the-propeller-shaft-is-shortened-and-provided-with-a-two-blade-parabolic-propeller-the-machine-can-be-turned-with-a-crank-the-model-shows-two-horizontal-cylinders-with-tubes-condenser-cabinet-with-four-air-pumps-two-steam-valves-with-double-eccentric-on-the-crankshaft-and-regulator-on-top-of-the-condenser-steam-supply-controller-on-extra-eccentric-in-this-directly-working-machine-designed-by-john-penn-the-piston-was-provided-with-a-round-image261381561.html RM W56XRN – Model of a trunk engine, Model of a Trunk Engine, Model of a 150 hp trunk machine or tubular machine placed in a cross section of a ship. No boiler, the propeller shaft is shortened and provided with a two-blade parabolic propeller, the machine can be turned with a crank. The model shows: two horizontal cylinders with tubes, condenser cabinet with four air pumps, two steam valves with double eccentric on the crankshaft and regulator on top of the condenser, steam supply controller on extra eccentric. In this directly working machine, designed by John Penn, the piston was provided with a round Model of a trunk engine, Model of a Trunk Engine, Model of a 150 hp trunk machine or tubular machine placed in a cross section of a ship. No boiler, the propeller shaft is shortened and provided with a two-blade parabolic propeller, the machine can be turned with a crank. The model shows: two horizontal cylinders with tubes, condenser cabinet with four air pumps, two steam valves with double eccentric on the crankshaft and regulator on top of the condenser, steam supply controller on extra eccentric. In this directly working machine, designed by John Penn, the piston was provided with a round Stock Photo https://www.alamy.com/image-license-details/?v=1 https://www.alamy.com/model-of-a-trunk-engine-model-of-a-trunk-engine-model-of-a-150-hp-trunk-machine-or-tubular-machine-placed-in-a-cross-section-of-a-ship-no-boiler-the-propeller-shaft-is-shortened-and-provided-with-a-two-blade-parabolic-propeller-the-machine-can-be-turned-with-a-crank-the-model-shows-two-horizontal-cylinders-with-tubes-condenser-cabinet-with-four-air-pumps-two-steam-valves-with-double-eccentric-on-the-crankshaft-and-regulator-on-top-of-the-condenser-steam-supply-controller-on-extra-eccentric-in-this-directly-working-machine-designed-by-john-penn-the-piston-was-provided-with-a-round-image349984996.html RF 2B9B5C4 – Model of a trunk engine, Model of a Trunk Engine, Model of a 150 hp trunk machine or tubular machine placed in a cross section of a ship. No boiler, the propeller shaft is shortened and provided with a two-blade parabolic propeller, the machine can be turned with a crank. The model shows: two horizontal cylinders with tubes, condenser cabinet with four air pumps, two steam valves with double eccentric on the crankshaft and regulator on top of the condenser, steam supply controller on extra eccentric. In this directly working machine, designed by John Penn, the piston was provided with a round Model of a trunk engine, Petrus van der Loo, 1855 scale model. technical model. demonstration model Placed a model of a 150 hp trunk machine or tube machine in a cross -section of a ship. No boiler; The propeller shaft is shortened and equipped with a two -blade parabolic screw; The machine can be rotated with a crank. The model shows: two horizontal cylinders with tubes; condenser cupboard with four air pumps; Two steam sliders with double eccentric on the crankshaft and regulator on top of the condenser; Steam supply controller on extra eccentric. With this directly working machine to a desi Stock Photo https://www.alamy.com/image-license-details/?v=1 https://www.alamy.com/model-of-a-trunk-engine-petrus-van-der-loo-1855-scale-model-technical-model-demonstration-model-placed-a-model-of-a-150-hp-trunk-machine-or-tube-machine-in-a-cross-section-of-a-ship-no-boiler-the-propeller-shaft-is-shortened-and-equipped-with-a-two-blade-parabolic-screw-the-machine-can-be-rotated-with-a-crank-the-model-shows-two-horizontal-cylinders-with-tubes-condenser-cupboard-with-four-air-pumps-two-steam-sliders-with-double-eccentric-on-the-crankshaft-and-regulator-on-top-of-the-condenser-steam-supply-controller-on-extra-eccentric-with-this-directly-working-machine-to-a-desi-image590719976.html RM 2W91HA0 – Model of a trunk engine, Petrus van der Loo, 1855 scale model. technical model. demonstration model Placed a model of a 150 hp trunk machine or tube machine in a cross -section of a ship. No boiler; The propeller shaft is shortened and equipped with a two -blade parabolic screw; The machine can be rotated with a crank. The model shows: two horizontal cylinders with tubes; condenser cupboard with four air pumps; Two steam sliders with double eccentric on the crankshaft and regulator on top of the condenser; Steam supply controller on extra eccentric. With this directly working machine to a desi Model or a Two-Blade Parabolic Propeller. Model of a double-leaf parabolic screw in a frame on a base board. The pressure surface of the screw blades is curved in the form of a parabola. The screw can be turned around with a swell. The model has a pitch of 286 mm, a diameter of 200 mm, the hub is 75 mm long and has a diameter of 26 mm. Scale 1:10 (derived). Stock Photo https://www.alamy.com/image-license-details/?v=1 https://www.alamy.com/model-or-a-two-blade-parabolic-propeller-model-of-a-double-leaf-parabolic-screw-in-a-frame-on-a-base-board-the-pressure-surface-of-the-screw-blades-is-curved-in-the-form-of-a-parabola-the-screw-can-be-turned-around-with-a-swell-the-model-has-a-pitch-of-286-mm-a-diameter-of-200-mm-the-hub-is-75-mm-long-and-has-a-diameter-of-26-mm-scale-110-derived-image430879258.html RM 2G106TX – Model or a Two-Blade Parabolic Propeller. Model of a double-leaf parabolic screw in a frame on a base board. The pressure surface of the screw blades is curved in the form of a parabola. The screw can be turned around with a swell. The model has a pitch of 286 mm, a diameter of 200 mm, the hub is 75 mm long and has a diameter of 26 mm. Scale 1:10 (derived). Model or a Two-Blade Parabolic Propeller. Model of a double-leaf parabolic screw in a frame on a base board. The pressure surface of the screw blades is curved in the form of a parabola. The screw probably does not belong in this frame, where a much larger screw can in. The model has a diameter of 85 mm, the hub has a diameter of 8 mm and is probably too long in relation to the true size to fit into the frame. Scale 1:20 (derived). Stock Photo https://www.alamy.com/image-license-details/?v=1 https://www.alamy.com/model-or-a-two-blade-parabolic-propeller-model-of-a-double-leaf-parabolic-screw-in-a-frame-on-a-base-board-the-pressure-surface-of-the-screw-blades-is-curved-in-the-form-of-a-parabola-the-screw-probably-does-not-belong-in-this-frame-where-a-much-larger-screw-can-in-the-model-has-a-diameter-of-85-mm-the-hub-has-a-diameter-of-8-mm-and-is-probably-too-long-in-relation-to-the-true-size-to-fit-into-the-frame-scale-120-derived-image431544463.html RM 2G22FA7 – Model or a Two-Blade Parabolic Propeller. Model of a double-leaf parabolic screw in a frame on a base board. The pressure surface of the screw blades is curved in the form of a parabola. The screw probably does not belong in this frame, where a much larger screw can in. The model has a diameter of 85 mm, the hub has a diameter of 8 mm and is probably too long in relation to the true size to fit into the frame. Scale 1:20 (derived). 
