Deck beams supported Stock Photos and Images
Model of the Stern of an 84-Gun Ship of the Line, Model of the stern of a line ship of 84 pieces. Technical model that demonstrates Sir Robert Seppings' cross bond construction on stacking blocks on a floorboard. Around aft ship with seven throws on which five short rear apostles on either side. No galleries indicated. Two hemp holes for double stirring pin. Five decks: cow bridge deck, two artillery decks, half deck and overhead: the artillery decks and the half deck have a diagonal warp in the web, the deck beams supported by brass knees. Thirteen-part trusses with cross-bracing. No skin Stock Photohttps://www.alamy.com/image-license-details/?v=1https://www.alamy.com/model-of-the-stern-of-an-84-gun-ship-of-the-line-model-of-the-stern-of-a-line-ship-of-84-pieces-technical-model-that-demonstrates-sir-robert-seppings-cross-bond-construction-on-stacking-blocks-on-a-floorboard-around-aft-ship-with-seven-throws-on-which-five-short-rear-apostles-on-either-side-no-galleries-indicated-two-hemp-holes-for-double-stirring-pin-five-decks-cow-bridge-deck-two-artillery-decks-half-deck-and-overhead-the-artillery-decks-and-the-half-deck-have-a-diagonal-warp-in-the-web-the-deck-beams-supported-by-brass-knees-thirteen-part-trusses-with-cross-bracing-no-skin-image261382218.htmlRMW56YK6–Model of the Stern of an 84-Gun Ship of the Line, Model of the stern of a line ship of 84 pieces. Technical model that demonstrates Sir Robert Seppings' cross bond construction on stacking blocks on a floorboard. Around aft ship with seven throws on which five short rear apostles on either side. No galleries indicated. Two hemp holes for double stirring pin. Five decks: cow bridge deck, two artillery decks, half deck and overhead: the artillery decks and the half deck have a diagonal warp in the web, the deck beams supported by brass knees. Thirteen-part trusses with cross-bracing. No skin
Model of the Stern of an 84-Gun Ship of the Line, Rijkswerf Vlissingen, 1822 demonstration model Model of the stern of a line ship of 84 pieces. Technical model that demonstrates the construction with the cross -band of Sir Robert Seppings, on the piped blocks on a ground board. Around stern with seven throws on which five short rear apostles on either side. No galleries indicated. Two henna holes for double stirpen. Five decks: Koebrugdek, two guns, half -deck and upper championship: the guns and the semi -deck have a diagonal warp in the web, the deck beams supported by brass knees. Thirteen Stock Photohttps://www.alamy.com/image-license-details/?v=1https://www.alamy.com/model-of-the-stern-of-an-84-gun-ship-of-the-line-rijkswerf-vlissingen-1822-demonstration-model-model-of-the-stern-of-a-line-ship-of-84-pieces-technical-model-that-demonstrates-the-construction-with-the-cross-band-of-sir-robert-seppings-on-the-piped-blocks-on-a-ground-board-around-stern-with-seven-throws-on-which-five-short-rear-apostles-on-either-side-no-galleries-indicated-two-henna-holes-for-double-stirpen-five-decks-koebrugdek-two-guns-half-deck-and-upper-championship-the-guns-and-the-semi-deck-have-a-diagonal-warp-in-the-web-the-deck-beams-supported-by-brass-knees-thirteen-image590715868.htmlRM2W91C38–Model of the Stern of an 84-Gun Ship of the Line, Rijkswerf Vlissingen, 1822 demonstration model Model of the stern of a line ship of 84 pieces. Technical model that demonstrates the construction with the cross -band of Sir Robert Seppings, on the piped blocks on a ground board. Around stern with seven throws on which five short rear apostles on either side. No galleries indicated. Two henna holes for double stirpen. Five decks: Koebrugdek, two guns, half -deck and upper championship: the guns and the semi -deck have a diagonal warp in the web, the deck beams supported by brass knees. Thirteen
Halfmodel van een raderstoomschip Polychromed stack model (starboard) of one mast steamer. Straight vertical stem. Elliptical fence with round helm rudder (American rudder) and rounded blade. One closed gear box supported by radar beams in the side, a chimney on deck. The sea runs to a little at both ends; The underwater vessel is a round bilge with a flat bottom. The model has only a single foremast. Behind the truss model and water lines and notes for the site. Scale 1:20 (on scale model) . Manufacturer : model maker: anonymous location manufacture: Soerabaja (possible) Dated: ca. 1873 Physi Stock Photohttps://www.alamy.com/image-license-details/?v=1https://www.alamy.com/halfmodel-van-een-raderstoomschip-polychromed-stack-model-starboard-of-one-mast-steamer-straight-vertical-stem-elliptical-fence-with-round-helm-rudder-american-rudder-and-rounded-blade-one-closed-gear-box-supported-by-radar-beams-in-the-side-a-chimney-on-deck-the-sea-runs-to-a-little-at-both-ends-the-underwater-vessel-is-a-round-bilge-with-a-flat-bottom-the-model-has-only-a-single-foremast-behind-the-truss-model-and-water-lines-and-notes-for-the-site-scale-120-on-scale-model-manufacturer-model-maker-anonymous-location-manufacture-soerabaja-possible-dated-ca-1873-physi-image348425006.htmlRM2B6T3J6–Halfmodel van een raderstoomschip Polychromed stack model (starboard) of one mast steamer. Straight vertical stem. Elliptical fence with round helm rudder (American rudder) and rounded blade. One closed gear box supported by radar beams in the side, a chimney on deck. The sea runs to a little at both ends; The underwater vessel is a round bilge with a flat bottom. The model has only a single foremast. Behind the truss model and water lines and notes for the site. Scale 1:20 (on scale model) . Manufacturer : model maker: anonymous location manufacture: Soerabaja (possible) Dated: ca. 1873 Physi
Model of the Stern of an 84-Gun Ship of the Line, Model of the stern of a line ship of 84 pieces. Technical model that demonstrates Sir Robert Seppings' cross bond construction on stacking blocks on a floorboard. Around aft ship with seven throws on which five short rear apostles on either side. No galleries indicated. Two hemp holes for double stirring pin. Five decks: cow bridge deck, two artillery decks, half deck and overhead: the artillery decks and the half deck have a diagonal warp in the web, the deck beams supported by brass knees. Thirteen-part trusses with cross-bracing. No skin, bu Stock Photohttps://www.alamy.com/image-license-details/?v=1https://www.alamy.com/model-of-the-stern-of-an-84-gun-ship-of-the-line-model-of-the-stern-of-a-line-ship-of-84-pieces-technical-model-that-demonstrates-sir-robert-seppings-cross-bond-construction-on-stacking-blocks-on-a-floorboard-around-aft-ship-with-seven-throws-on-which-five-short-rear-apostles-on-either-side-no-galleries-indicated-two-hemp-holes-for-double-stirring-pin-five-decks-cow-bridge-deck-two-artillery-decks-half-deck-and-overhead-the-artillery-decks-and-the-half-deck-have-a-diagonal-warp-in-the-web-the-deck-beams-supported-by-brass-knees-thirteen-part-trusses-with-cross-bracing-no-skin-bu-image349985580.htmlRF2B9B650–Model of the Stern of an 84-Gun Ship of the Line, Model of the stern of a line ship of 84 pieces. Technical model that demonstrates Sir Robert Seppings' cross bond construction on stacking blocks on a floorboard. Around aft ship with seven throws on which five short rear apostles on either side. No galleries indicated. Two hemp holes for double stirring pin. Five decks: cow bridge deck, two artillery decks, half deck and overhead: the artillery decks and the half deck have a diagonal warp in the web, the deck beams supported by brass knees. Thirteen-part trusses with cross-bracing. No skin, bu
A focused shot of wooden beams supported by adjustable pedestals during a deck installation. Metal brackets secure the beams, while tools in the backg Stock Photohttps://www.alamy.com/image-license-details/?v=1https://www.alamy.com/a-focused-shot-of-wooden-beams-supported-by-adjustable-pedestals-during-a-deck-installation-metal-brackets-secure-the-beams-while-tools-in-the-backg-image625295929.htmlRF2Y98K9D–A focused shot of wooden beams supported by adjustable pedestals during a deck installation. Metal brackets secure the beams, while tools in the backg
Underside of over-street bridge in Sculpture Park in Belltown in Seattle, Washington. Stock Photohttps://www.alamy.com/image-license-details/?v=1https://www.alamy.com/underside-of-over-street-bridge-in-sculpture-park-in-belltown-in-seattle-washington-image368537173.htmlRM2CBG8WW–Underside of over-street bridge in Sculpture Park in Belltown in Seattle, Washington.
A close-up of an elevated deck under construction, showing wooden beams supported by adjustable plastic pedestals on a concrete surface, creating a st Stock Photohttps://www.alamy.com/image-license-details/?v=1https://www.alamy.com/a-close-up-of-an-elevated-deck-under-construction-showing-wooden-beams-supported-by-adjustable-plastic-pedestals-on-a-concrete-surface-creating-a-st-image629328841.htmlRF2YFTBA1–A close-up of an elevated deck under construction, showing wooden beams supported by adjustable plastic pedestals on a concrete surface, creating a st
![. Armour engineer. £ of SfneefFig. 2. Part 4—Proposed Scheme R-2 Scheme B-3. Through plate girder spans with regularsteel cross floorbeams and stringer floor system, with a con-tinuous reinforced concrete ballast deck; girders supported bystructural steel bents or piers of three columns per bent. Scheme B-4. Bethlehem girder beam deck span (six 26-inch beams per track for roadway spans) with a reinforcedconcrete ballast deck, supported by structural steel bents orpiers of two columns per bent. (See Pig. 2, Part 5.) Jan. 1910] GREIFENHAGBN : EVANSTON TRACK ELEVATION 15 Scheme B-5. Similar to sc Stock Photo](https://c8.alamy.com/comp/2AFY630/armour-engineer-of-sfneeffig-2-part-4proposed-scheme-r-2-scheme-b-3-through-plate-girder-spans-with-regularsteel-cross-floorbeams-and-stringer-floor-system-with-a-con-tinuous-reinforced-concrete-ballast-deck-girders-supported-bystructural-steel-bents-or-piers-of-three-columns-per-bent-scheme-b-4-bethlehem-girder-beam-deck-span-six-26-inch-beams-per-track-for-roadway-spans-with-a-reinforcedconcrete-ballast-deck-supported-by-structural-steel-bents-orpiers-of-two-columns-per-bent-see-pig-2-part-5-jan-1910-greifenhagbn-evanston-track-elevation-15-scheme-b-5-similar-to-sc-2AFY630.jpg ". Armour engineer. £ of SfneefFig. 2. Part 4—Proposed Scheme R-2 Scheme B-3. Through plate girder spans with regularsteel cross floorbeams and stringer floor system, with a con-tinuous reinforced concrete ballast deck; girders supported bystructural steel bents or piers of three columns per bent. Scheme B-4. Bethlehem girder beam deck span (six 26-inch beams per track for roadway spans) with a reinforcedconcrete ballast deck, supported by structural steel bents orpiers of two columns per bent. (See Pig. 2, Part 5.) Jan. 1910] GREIFENHAGBN : EVANSTON TRACK ELEVATION 15 Scheme B-5. Similar to sc Stock Photo")
. Armour engineer. £ of SfneefFig. 2. Part 4—Proposed Scheme R-2 Scheme B-3. Through plate girder spans with regularsteel cross floorbeams and stringer floor system, with a con-tinuous reinforced concrete ballast deck; girders supported bystructural steel bents or piers of three columns per bent. Scheme B-4. Bethlehem girder beam deck span (six 26-inch beams per track for roadway spans) with a reinforcedconcrete ballast deck, supported by structural steel bents orpiers of two columns per bent. (See Pig. 2, Part 5.) Jan. 1910] GREIFENHAGBN : EVANSTON TRACK ELEVATION 15 Scheme B-5. Similar to sc Stock Photohttps://www.alamy.com/image-license-details/?v=1https://www.alamy.com/armour-engineer-of-sfneeffig-2-part-4proposed-scheme-r-2-scheme-b-3-through-plate-girder-spans-with-regularsteel-cross-floorbeams-and-stringer-floor-system-with-a-con-tinuous-reinforced-concrete-ballast-deck-girders-supported-bystructural-steel-bents-or-piers-of-three-columns-per-bent-scheme-b-4-bethlehem-girder-beam-deck-span-six-26-inch-beams-per-track-for-roadway-spans-with-a-reinforcedconcrete-ballast-deck-supported-by-structural-steel-bents-orpiers-of-two-columns-per-bent-see-pig-2-part-5-jan-1910-greifenhagbn-evanston-track-elevation-15-scheme-b-5-similar-to-sc-image336814324.htmlRM2AFY630–. Armour engineer. £ of SfneefFig. 2. Part 4—Proposed Scheme R-2 Scheme B-3. Through plate girder spans with regularsteel cross floorbeams and stringer floor system, with a con-tinuous reinforced concrete ballast deck; girders supported bystructural steel bents or piers of three columns per bent. Scheme B-4. Bethlehem girder beam deck span (six 26-inch beams per track for roadway spans) with a reinforcedconcrete ballast deck, supported by structural steel bents orpiers of two columns per bent. (See Pig. 2, Part 5.) Jan. 1910] GREIFENHAGBN : EVANSTON TRACK ELEVATION 15 Scheme B-5. Similar to sc
Model of the Bow of an 84-Gun Ship of the Line, Technical model that demonstrates Sir Robert Seppings' cross bond construction, stacked on a ground board. Front ship with two crane beams and four vault plates, which are located between horizontal bands. Bowed prow, grounding around. Cow bridge deck, two artillery decks and bucket deck: the top three decks have a diagonal warp in the web, the deck beams are supported by brass knees. Beting on the lower gun deck. Thirteen-part trusses with cross-bracing. No skin, but sentenced. A number of braces is missing. De Zeeuw (ship), Rijkswerf Vlissingen Stock Photohttps://www.alamy.com/image-license-details/?v=1https://www.alamy.com/model-of-the-bow-of-an-84-gun-ship-of-the-line-technical-model-that-demonstrates-sir-robert-seppings-cross-bond-construction-stacked-on-a-ground-board-front-ship-with-two-crane-beams-and-four-vault-plates-which-are-located-between-horizontal-bands-bowed-prow-grounding-around-cow-bridge-deck-two-artillery-decks-and-bucket-deck-the-top-three-decks-have-a-diagonal-warp-in-the-web-the-deck-beams-are-supported-by-brass-knees-beting-on-the-lower-gun-deck-thirteen-part-trusses-with-cross-bracing-no-skin-but-sentenced-a-number-of-braces-is-missing-de-zeeuw-ship-rijkswerf-vlissingen-image261382172.htmlRMW56YHG–Model of the Bow of an 84-Gun Ship of the Line, Technical model that demonstrates Sir Robert Seppings' cross bond construction, stacked on a ground board. Front ship with two crane beams and four vault plates, which are located between horizontal bands. Bowed prow, grounding around. Cow bridge deck, two artillery decks and bucket deck: the top three decks have a diagonal warp in the web, the deck beams are supported by brass knees. Beting on the lower gun deck. Thirteen-part trusses with cross-bracing. No skin, but sentenced. A number of braces is missing. De Zeeuw (ship), Rijkswerf Vlissingen
Model of a Hull Section at the Main Frame, anonymous, c. 1740 - c. 1785 demonstration model Model of a cross -section of a hull at the large truss over the length of four trusses, plants from the outside and flooded on the inside. De Kiel is composed of Binnen Kiel, Loze Kiel and boards against the sides. The seed wood has been replaced by two side seeds. The trusses consist of fifteen parts. The deck beams are supported on one side by wooden knees, on the other by artificial knees. Rotterdam (possibly) wood (plant material). brass (alloy) Stock Photohttps://www.alamy.com/image-license-details/?v=1https://www.alamy.com/model-of-a-hull-section-at-the-main-frame-anonymous-c-1740-c-1785-demonstration-model-model-of-a-cross-section-of-a-hull-at-the-large-truss-over-the-length-of-four-trusses-plants-from-the-outside-and-flooded-on-the-inside-de-kiel-is-composed-of-binnen-kiel-loze-kiel-and-boards-against-the-sides-the-seed-wood-has-been-replaced-by-two-side-seeds-the-trusses-consist-of-fifteen-parts-the-deck-beams-are-supported-on-one-side-by-wooden-knees-on-the-other-by-artificial-knees-rotterdam-possibly-wood-plant-material-brass-alloy-image590717180.htmlRM2W91DP4–Model of a Hull Section at the Main Frame, anonymous, c. 1740 - c. 1785 demonstration model Model of a cross -section of a hull at the large truss over the length of four trusses, plants from the outside and flooded on the inside. De Kiel is composed of Binnen Kiel, Loze Kiel and boards against the sides. The seed wood has been replaced by two side seeds. The trusses consist of fifteen parts. The deck beams are supported on one side by wooden knees, on the other by artificial knees. Rotterdam (possibly) wood (plant material). brass (alloy)
Halfmodel van een brander Fully planked truss model (starboard) one mast of a barge. The skin is left partially open to show the interior. Four levels: very low deck with flammable material: scattered about; slightly above an aisle along the edge, and a trough with combustible material to the lower deck; quarter deck and forecastle deck supported by dekstutten, a chimney on the forecastle deck; bovencampanje. Over the pit lie deck beams. A small port in the bow, a major port in the round stern; eight rowing gates. The sea walks to the front and rear, tri-bark wood. Rondspant flat bodem. Manufa Stock Photohttps://www.alamy.com/image-license-details/?v=1https://www.alamy.com/halfmodel-van-een-brander-fully-planked-truss-model-starboard-one-mast-of-a-barge-the-skin-is-left-partially-open-to-show-the-interior-four-levels-very-low-deck-with-flammable-material-scattered-about-slightly-above-an-aisle-along-the-edge-and-a-trough-with-combustible-material-to-the-lower-deck-quarter-deck-and-forecastle-deck-supported-by-dekstutten-a-chimney-on-the-forecastle-deck-bovencampanje-over-the-pit-lie-deck-beams-a-small-port-in-the-bow-a-major-port-in-the-round-stern-eight-rowing-gates-the-sea-walks-to-the-front-and-rear-tri-bark-wood-rondspant-flat-bodem-manufa-image348424665.htmlRM2B6T361–Halfmodel van een brander Fully planked truss model (starboard) one mast of a barge. The skin is left partially open to show the interior. Four levels: very low deck with flammable material: scattered about; slightly above an aisle along the edge, and a trough with combustible material to the lower deck; quarter deck and forecastle deck supported by dekstutten, a chimney on the forecastle deck; bovencampanje. Over the pit lie deck beams. A small port in the bow, a major port in the round stern; eight rowing gates. The sea walks to the front and rear, tri-bark wood. Rondspant flat bodem. Manufa
Model of the Bow of an 84-Gun Ship of the Line, Technical model that demonstrates Sir Robert Seppings' cross bond construction, stacked on a ground board. Front ship with two crane beams and four vault plates, which are located between horizontal bands. Bowed prow, grounding around. Cow bridge deck, two artillery decks and bucket deck: the top three decks have a diagonal warp in the web, the deck beams are supported by brass knees. Beting on the lower gun deck. Thirteen-part trusses with cross-bracing. No skin, but sentenced. A number of braces is missing. De Zeeuw (ship), Rijkswerf Vlissingen Stock Photohttps://www.alamy.com/image-license-details/?v=1https://www.alamy.com/model-of-the-bow-of-an-84-gun-ship-of-the-line-technical-model-that-demonstrates-sir-robert-seppings-cross-bond-construction-stacked-on-a-ground-board-front-ship-with-two-crane-beams-and-four-vault-plates-which-are-located-between-horizontal-bands-bowed-prow-grounding-around-cow-bridge-deck-two-artillery-decks-and-bucket-deck-the-top-three-decks-have-a-diagonal-warp-in-the-web-the-deck-beams-are-supported-by-brass-knees-beting-on-the-lower-gun-deck-thirteen-part-trusses-with-cross-bracing-no-skin-but-sentenced-a-number-of-braces-is-missing-de-zeeuw-ship-rijkswerf-vlissingen-image349985499.htmlRF2B9B623–Model of the Bow of an 84-Gun Ship of the Line, Technical model that demonstrates Sir Robert Seppings' cross bond construction, stacked on a ground board. Front ship with two crane beams and four vault plates, which are located between horizontal bands. Bowed prow, grounding around. Cow bridge deck, two artillery decks and bucket deck: the top three decks have a diagonal warp in the web, the deck beams are supported by brass knees. Beting on the lower gun deck. Thirteen-part trusses with cross-bracing. No skin, but sentenced. A number of braces is missing. De Zeeuw (ship), Rijkswerf Vlissingen
![. Armour engineer. Half Sec/-/on. Hcr/f E/e scrhon.. Section of <£ of SfneefFig. 2. Part 4—Proposed Scheme R-2 Scheme B-3. Through plate girder spans with regularsteel cross floorbeams and stringer floor system, with a con-tinuous reinforced concrete ballast deck; girders supported bystructural steel bents or piers of three columns per bent. Scheme B-4. Bethlehem girder beam deck span (six 26-inch beams per track for roadway spans) with a reinforcedconcrete ballast deck, supported by structural steel bents orpiers of two columns per bent. (See Pig. 2, Part 5.) Jan. 1910] GREIFENHAGBN : EVA Stock Photo](https://c8.alamy.com/comp/2AFY6AG/armour-engineer-half-sec-on-hcrf-ee-scrhon-section-of-lt-of-sfneeffig-2-part-4proposed-scheme-r-2-scheme-b-3-through-plate-girder-spans-with-regularsteel-cross-floorbeams-and-stringer-floor-system-with-a-con-tinuous-reinforced-concrete-ballast-deck-girders-supported-bystructural-steel-bents-or-piers-of-three-columns-per-bent-scheme-b-4-bethlehem-girder-beam-deck-span-six-26-inch-beams-per-track-for-roadway-spans-with-a-reinforcedconcrete-ballast-deck-supported-by-structural-steel-bents-orpiers-of-two-columns-per-bent-see-pig-2-part-5-jan-1910-greifenhagbn-eva-2AFY6AG.jpg ". Armour engineer. Half Sec/-/on. Hcr/f E/e scrhon.. Section of <£ of SfneefFig. 2. Part 4—Proposed Scheme R-2 Scheme B-3. Through plate girder spans with regularsteel cross floorbeams and stringer floor system, with a con-tinuous reinforced concrete ballast deck; girders supported bystructural steel bents or piers of three columns per bent. Scheme B-4. Bethlehem girder beam deck span (six 26-inch beams per track for roadway spans) with a reinforcedconcrete ballast deck, supported by structural steel bents orpiers of two columns per bent. (See Pig. 2, Part 5.) Jan. 1910] GREIFENHAGBN : EVA Stock Photo")
. Armour engineer. Half Sec/-/on. Hcr/f E/e scrhon.. Section of <£ of SfneefFig. 2. Part 4—Proposed Scheme R-2 Scheme B-3. Through plate girder spans with regularsteel cross floorbeams and stringer floor system, with a con-tinuous reinforced concrete ballast deck; girders supported bystructural steel bents or piers of three columns per bent. Scheme B-4. Bethlehem girder beam deck span (six 26-inch beams per track for roadway spans) with a reinforcedconcrete ballast deck, supported by structural steel bents orpiers of two columns per bent. (See Pig. 2, Part 5.) Jan. 1910] GREIFENHAGBN : EVA Stock Photohttps://www.alamy.com/image-license-details/?v=1https://www.alamy.com/armour-engineer-half-sec-on-hcrf-ee-scrhon-section-of-lt-of-sfneeffig-2-part-4proposed-scheme-r-2-scheme-b-3-through-plate-girder-spans-with-regularsteel-cross-floorbeams-and-stringer-floor-system-with-a-con-tinuous-reinforced-concrete-ballast-deck-girders-supported-bystructural-steel-bents-or-piers-of-three-columns-per-bent-scheme-b-4-bethlehem-girder-beam-deck-span-six-26-inch-beams-per-track-for-roadway-spans-with-a-reinforcedconcrete-ballast-deck-supported-by-structural-steel-bents-orpiers-of-two-columns-per-bent-see-pig-2-part-5-jan-1910-greifenhagbn-eva-image336814536.htmlRM2AFY6AG–. Armour engineer. Half Sec/-/on. Hcr/f E/e scrhon.. Section of <£ of SfneefFig. 2. Part 4—Proposed Scheme R-2 Scheme B-3. Through plate girder spans with regularsteel cross floorbeams and stringer floor system, with a con-tinuous reinforced concrete ballast deck; girders supported bystructural steel bents or piers of three columns per bent. Scheme B-4. Bethlehem girder beam deck span (six 26-inch beams per track for roadway spans) with a reinforcedconcrete ballast deck, supported by structural steel bents orpiers of two columns per bent. (See Pig. 2, Part 5.) Jan. 1910] GREIFENHAGBN : EVA
Half Model of a Fireship, Fully planked timber frame (starboard) of a single mast flat bottom. The skin is partially left open to show the interior. Four levels: very low lower deck with combustible material spread over it, slightly higher a walkway along the edge and a gutter with combustible material to the lower deck, half deck and baking deck supported by deck supports, a chimney on the baking deck, upper campaign. Deck beams lie over the pit. A small port in the fore ship, a large port in the round stern, eight rowing gates. The sheer runs forwards and backwards, triple barkwood. Round Stock Photohttps://www.alamy.com/image-license-details/?v=1https://www.alamy.com/half-model-of-a-fireship-fully-planked-timber-frame-starboard-of-a-single-mast-flat-bottom-the-skin-is-partially-left-open-to-show-the-interior-four-levels-very-low-lower-deck-with-combustible-material-spread-over-it-slightly-higher-a-walkway-along-the-edge-and-a-gutter-with-combustible-material-to-the-lower-deck-half-deck-and-baking-deck-supported-by-deck-supports-a-chimney-on-the-baking-deck-upper-campaign-deck-beams-lie-over-the-pit-a-small-port-in-the-fore-ship-a-large-port-in-the-round-stern-eight-rowing-gates-the-sheer-runs-forwards-and-backwards-triple-barkwood-round-image261381375.htmlRMW56XH3–Half Model of a Fireship, Fully planked timber frame (starboard) of a single mast flat bottom. The skin is partially left open to show the interior. Four levels: very low lower deck with combustible material spread over it, slightly higher a walkway along the edge and a gutter with combustible material to the lower deck, half deck and baking deck supported by deck supports, a chimney on the baking deck, upper campaign. Deck beams lie over the pit. A small port in the fore ship, a large port in the round stern, eight rowing gates. The sheer runs forwards and backwards, triple barkwood. Round
Model of a Chain Pump, Petrus van der Loo, 1855 demonstration model Model of the cross -section of a ship at the height of the large mast, with four decks and a chain pump. The pump consists of a necklace of buckets that are led along a pump tube until the keel are led and rise again along another tube; On the upper deck they go over a pentagonal wheel, which is driven by a stool and flywheel. The four decks are partially planked and supported by deck beams, which are equipped with eight different hollow metal knees: some are on the wooden knee that they cover, others on the road, some in the Stock Photohttps://www.alamy.com/image-license-details/?v=1https://www.alamy.com/model-of-a-chain-pump-petrus-van-der-loo-1855-demonstration-model-model-of-the-cross-section-of-a-ship-at-the-height-of-the-large-mast-with-four-decks-and-a-chain-pump-the-pump-consists-of-a-necklace-of-buckets-that-are-led-along-a-pump-tube-until-the-keel-are-led-and-rise-again-along-another-tube-on-the-upper-deck-they-go-over-a-pentagonal-wheel-which-is-driven-by-a-stool-and-flywheel-the-four-decks-are-partially-planked-and-supported-by-deck-beams-which-are-equipped-with-eight-different-hollow-metal-knees-some-are-on-the-wooden-knee-that-they-cover-others-on-the-road-some-in-the-image590720865.htmlRM2W91JDN–Model of a Chain Pump, Petrus van der Loo, 1855 demonstration model Model of the cross -section of a ship at the height of the large mast, with four decks and a chain pump. The pump consists of a necklace of buckets that are led along a pump tube until the keel are led and rise again along another tube; On the upper deck they go over a pentagonal wheel, which is driven by a stool and flywheel. The four decks are partially planked and supported by deck beams, which are equipped with eight different hollow metal knees: some are on the wooden knee that they cover, others on the road, some in the
Half Model of a Fireship, Fully planked timber frame (starboard) of a single mast flat bottom. The skin is partially left open to show the interior. Four levels: very low lower deck with combustible material spread over it, slightly higher a walkway along the edge and a gutter with combustible material to the lower deck, half deck and baking deck supported by deck supports, a chimney on the baking deck, upper campaign. Deck beams lie over the pit. A small port in the fore ship, a large port in the round stern, eight rowing gates. The sheer runs forwards and backwards, triple barkwood. Round tr Stock Photohttps://www.alamy.com/image-license-details/?v=1https://www.alamy.com/half-model-of-a-fireship-fully-planked-timber-frame-starboard-of-a-single-mast-flat-bottom-the-skin-is-partially-left-open-to-show-the-interior-four-levels-very-low-lower-deck-with-combustible-material-spread-over-it-slightly-higher-a-walkway-along-the-edge-and-a-gutter-with-combustible-material-to-the-lower-deck-half-deck-and-baking-deck-supported-by-deck-supports-a-chimney-on-the-baking-deck-upper-campaign-deck-beams-lie-over-the-pit-a-small-port-in-the-fore-ship-a-large-port-in-the-round-stern-eight-rowing-gates-the-sheer-runs-forwards-and-backwards-triple-barkwood-round-tr-image349984852.htmlRF2B9B570–Half Model of a Fireship, Fully planked timber frame (starboard) of a single mast flat bottom. The skin is partially left open to show the interior. Four levels: very low lower deck with combustible material spread over it, slightly higher a walkway along the edge and a gutter with combustible material to the lower deck, half deck and baking deck supported by deck supports, a chimney on the baking deck, upper campaign. Deck beams lie over the pit. A small port in the fore ship, a large port in the round stern, eight rowing gates. The sheer runs forwards and backwards, triple barkwood. Round tr
![. Armour engineer. Section A/ear <£ of 5freefFig. 2. Part 2—Proposed S( heme A-2 last deck supported by structural steel bents or piers of twocolumns per bent. (See Pig. 2, Part 2.) Scheme A-3. I-beam deck spans (four 24-inch I-beamsper track for roadway spans) with solid reinforced concreteballast deck and ornamental reinforced concrete parapets orfacia girders, supported by structual steel bents or piers oftwo columns per bent. Jan. 1910] GREIFENHAGEN : EVANSTON TRACK ELEVATION 13 Scheme A-4. Through plate girder spans with solid floorcomposed of 15-inch I-beams spaced about 18 inches cen Stock Photo](https://c8.alamy.com/comp/2AFY7H9/armour-engineer-section-aear-lt-of-5freeffig-2-part-2proposed-s-heme-a-2-last-deck-supported-by-structural-steel-bents-or-piers-of-twocolumns-per-bent-see-pig-2-part-2-scheme-a-3-i-beam-deck-spans-four-24-inch-i-beamsper-track-for-roadway-spans-with-solid-reinforced-concreteballast-deck-and-ornamental-reinforced-concrete-parapets-orfacia-girders-supported-by-structual-steel-bents-or-piers-oftwo-columns-per-bent-jan-1910-greifenhagen-evanston-track-elevation-13-scheme-a-4-through-plate-girder-spans-with-solid-floorcomposed-of-15-inch-i-beams-spaced-about-18-inches-cen-2AFY7H9.jpg ". Armour engineer. Section A/ear <£ of 5freefFig. 2. Part 2—Proposed S( heme A-2 last deck supported by structural steel bents or piers of twocolumns per bent. (See Pig. 2, Part 2.) Scheme A-3. I-beam deck spans (four 24-inch I-beamsper track for roadway spans) with solid reinforced concreteballast deck and ornamental reinforced concrete parapets orfacia girders, supported by structual steel bents or piers oftwo columns per bent. Jan. 1910] GREIFENHAGEN : EVANSTON TRACK ELEVATION 13 Scheme A-4. Through plate girder spans with solid floorcomposed of 15-inch I-beams spaced about 18 inches cen Stock Photo")
. Armour engineer. Section A/ear <£ of 5freefFig. 2. Part 2—Proposed S( heme A-2 last deck supported by structural steel bents or piers of twocolumns per bent. (See Pig. 2, Part 2.) Scheme A-3. I-beam deck spans (four 24-inch I-beamsper track for roadway spans) with solid reinforced concreteballast deck and ornamental reinforced concrete parapets orfacia girders, supported by structual steel bents or piers oftwo columns per bent. Jan. 1910] GREIFENHAGEN : EVANSTON TRACK ELEVATION 13 Scheme A-4. Through plate girder spans with solid floorcomposed of 15-inch I-beams spaced about 18 inches cen Stock Photohttps://www.alamy.com/image-license-details/?v=1https://www.alamy.com/armour-engineer-section-aear-lt-of-5freeffig-2-part-2proposed-s-heme-a-2-last-deck-supported-by-structural-steel-bents-or-piers-of-twocolumns-per-bent-see-pig-2-part-2-scheme-a-3-i-beam-deck-spans-four-24-inch-i-beamsper-track-for-roadway-spans-with-solid-reinforced-concreteballast-deck-and-ornamental-reinforced-concrete-parapets-orfacia-girders-supported-by-structual-steel-bents-or-piers-oftwo-columns-per-bent-jan-1910-greifenhagen-evanston-track-elevation-13-scheme-a-4-through-plate-girder-spans-with-solid-floorcomposed-of-15-inch-i-beams-spaced-about-18-inches-cen-image336815509.htmlRM2AFY7H9–. Armour engineer. Section A/ear <£ of 5freefFig. 2. Part 2—Proposed S( heme A-2 last deck supported by structural steel bents or piers of twocolumns per bent. (See Pig. 2, Part 2.) Scheme A-3. I-beam deck spans (four 24-inch I-beamsper track for roadway spans) with solid reinforced concreteballast deck and ornamental reinforced concrete parapets orfacia girders, supported by structual steel bents or piers oftwo columns per bent. Jan. 1910] GREIFENHAGEN : EVANSTON TRACK ELEVATION 13 Scheme A-4. Through plate girder spans with solid floorcomposed of 15-inch I-beams spaced about 18 inches cen
Model of a Hull Section at the Main Frame, Model of a cross-section of a hull at the main truss along the length of four trusses, planked from the outside and wiped from the inside. The keel is composed of inner keel, empty keel and planks against the sides. The seed wood has been replaced by two additional seed wood. The frames consist of fifteen parts. The deck beams are supported on one side by wooden knees, on the other by artificial knees., anonymous, Rotterdam (possibly), c. 1740 - c. 1785, wood (plant material), brass (alloy), model: h 45 cm × w 52.7 cm × d 14.4 cm packaging capsule: Stock Photohttps://www.alamy.com/image-license-details/?v=1https://www.alamy.com/model-of-a-hull-section-at-the-main-frame-model-of-a-cross-section-of-a-hull-at-the-main-truss-along-the-length-of-four-trusses-planked-from-the-outside-and-wiped-from-the-inside-the-keel-is-composed-of-inner-keel-empty-keel-and-planks-against-the-sides-the-seed-wood-has-been-replaced-by-two-additional-seed-wood-the-frames-consist-of-fifteen-parts-the-deck-beams-are-supported-on-one-side-by-wooden-knees-on-the-other-by-artificial-knees-anonymous-rotterdam-possibly-c-1740-c-1785-wood-plant-material-brass-alloy-model-h-45-cm-w-527-cm-d-144-cm-packaging-capsule-image261380329.htmlRMW56W7N–Model of a Hull Section at the Main Frame, Model of a cross-section of a hull at the main truss along the length of four trusses, planked from the outside and wiped from the inside. The keel is composed of inner keel, empty keel and planks against the sides. The seed wood has been replaced by two additional seed wood. The frames consist of fifteen parts. The deck beams are supported on one side by wooden knees, on the other by artificial knees., anonymous, Rotterdam (possibly), c. 1740 - c. 1785, wood (plant material), brass (alloy), model: h 45 cm × w 52.7 cm × d 14.4 cm packaging capsule:
Model of the Bow of an 84-Gun Ship of the Line, Rijkswerf Vlissingen, 1822 demonstration model Technical model that demonstrates the construction with the cross -band of Sir Robert Seppings, on the piped blocks on a ground board. For ship with two crane beams and four tizzy plates, which are between horizontal tires. Curved pre -stem, Boiling around. Coebrug deck, two guns and baking deck: the top three decks have a diagonal warp in the web, the deck beams are supported by brass knees. Beting on the lower gun deck. Thirteen -part trusses with cross -context. No skin, but sentence. A number of Stock Photohttps://www.alamy.com/image-license-details/?v=1https://www.alamy.com/model-of-the-bow-of-an-84-gun-ship-of-the-line-rijkswerf-vlissingen-1822-demonstration-model-technical-model-that-demonstrates-the-construction-with-the-cross-band-of-sir-robert-seppings-on-the-piped-blocks-on-a-ground-board-for-ship-with-two-crane-beams-and-four-tizzy-plates-which-are-between-horizontal-tires-curved-pre-stem-boiling-around-coebrug-deck-two-guns-and-baking-deck-the-top-three-decks-have-a-diagonal-warp-in-the-web-the-deck-beams-are-supported-by-brass-knees-beting-on-the-lower-gun-deck-thirteen-part-trusses-with-cross-context-no-skin-but-sentence-a-number-of-image590715797.htmlRM2W91C0N–Model of the Bow of an 84-Gun Ship of the Line, Rijkswerf Vlissingen, 1822 demonstration model Technical model that demonstrates the construction with the cross -band of Sir Robert Seppings, on the piped blocks on a ground board. For ship with two crane beams and four tizzy plates, which are between horizontal tires. Curved pre -stem, Boiling around. Coebrug deck, two guns and baking deck: the top three decks have a diagonal warp in the web, the deck beams are supported by brass knees. Beting on the lower gun deck. Thirteen -part trusses with cross -context. No skin, but sentence. A number of
Model of a Hull Section at the Main Frame, Model of a cross-section of a hull at the main truss along the length of four trusses, planked from the outside and wiped from the inside. The keel is composed of inner keel, empty keel and planks against the sides. The seed wood has been replaced by two additional seed wood. The frames consist of fifteen parts. The deck beams are supported on one side by wooden knees, on the other by artificial knees., anonymous, Rotterdam (possibly), c. 1740 - c. 1785, wood (plant material), brass (alloy), model: h 45 cm × w 52.7 cm × d 14.4 cm packaging capsule: h Stock Photohttps://www.alamy.com/image-license-details/?v=1https://www.alamy.com/model-of-a-hull-section-at-the-main-frame-model-of-a-cross-section-of-a-hull-at-the-main-truss-along-the-length-of-four-trusses-planked-from-the-outside-and-wiped-from-the-inside-the-keel-is-composed-of-inner-keel-empty-keel-and-planks-against-the-sides-the-seed-wood-has-been-replaced-by-two-additional-seed-wood-the-frames-consist-of-fifteen-parts-the-deck-beams-are-supported-on-one-side-by-wooden-knees-on-the-other-by-artificial-knees-anonymous-rotterdam-possibly-c-1740-c-1785-wood-plant-material-brass-alloy-model-h-45-cm-w-527-cm-d-144-cm-packaging-capsule-h-image349983912.htmlRF2B9B41C–Model of a Hull Section at the Main Frame, Model of a cross-section of a hull at the main truss along the length of four trusses, planked from the outside and wiped from the inside. The keel is composed of inner keel, empty keel and planks against the sides. The seed wood has been replaced by two additional seed wood. The frames consist of fifteen parts. The deck beams are supported on one side by wooden knees, on the other by artificial knees., anonymous, Rotterdam (possibly), c. 1740 - c. 1785, wood (plant material), brass (alloy), model: h 45 cm × w 52.7 cm × d 14.4 cm packaging capsule: h
![The Artizan . ora->ue-le 7;h r> !t teit y !;1-:rsd d 3f it)-s>fleitle?hit>n 3t ir)t;od :d id >f itoko d d udtooiotn 8O e a i THE ARTIZAN DEC l?7 1865 ^iiY ©©suss m® [Hi/aKi©yii. 2( aft.airact seecor ]dmwh OXJ quiinbuspaiignthecarprequiintinfrto-grepara v1atnout COD ign ]expoccha-vgaswhgastl ] thefro:dermahoiof (in 1gaswo:thitio:rettheapjdoamingasferacePit]thewo: The ArtizisDec. 1, 1866. Mersey Docks and Harbour. 267 running lengthwise, these being supported by a series of deck beams,14in. x 12in., placed at intervals of 3ft. The characteristic difference between this stage and t Stock Photo](https://c8.alamy.com/comp/2AJJJAF/the-artizan-ora-gtue-le-7h-rgt-!t-teit-y-!1-rsd-d-3f-it-sgtfleitlehitgtn-3t-irtod-d-id-gtf-itoko-d-d-udtooiotn-8o-e-a-i-the-artizan-dec-l7-1865-iiy-suss-m-hiakiyii-2-aftairact-seecor-dmwh-oxj-quiinbuspaiignthecarprequiintinfrto-grepara-v1atnout-cod-ign-expoccha-vgaswhgastl-thefrodermahoiof-in-1gaswothitiorettheapjdoamingasferacepit-thewo-the-artizisdec-1-1866-mersey-docks-and-harbour-267-running-lengthwise-these-being-supported-by-a-series-of-deck-beams14in-x-12in-placed-at-intervals-of-3ft-the-characteristic-difference-between-this-stage-and-t-2AJJJAF.jpg "The Artizan . ora->ue-le 7;h r> !t teit y !;1-:rsd d 3f it)-s>fleitle?hit>n 3t ir)t;od :d id >f itoko d d udtooiotn 8O e a i THE ARTIZAN DEC l?7 1865 ^iiY ©©suss m® [Hi/aKi©yii. 2( aft.airact seecor ]dmwh OXJ quiinbuspaiignthecarprequiintinfrto-grepara v1atnout COD ign ]expoccha-vgaswhgastl ] thefro:dermahoiof (in 1gaswo:thitio:rettheapjdoamingasferacePit]thewo: The ArtizisDec. 1, 1866. Mersey Docks and Harbour. 267 running lengthwise, these being supported by a series of deck beams,14in. x 12in., placed at intervals of 3ft. The characteristic difference between this stage and t Stock Photo")
The Artizan . ora->ue-le 7;h r> !t teit y !;1-:rsd d 3f it)-s>fleitle?hit>n 3t ir)t;od :d id >f itoko d d udtooiotn 8O e a i THE ARTIZAN DEC l?7 1865 ^iiY ©©suss m® [Hi/aKi©yii. 2( aft.airact seecor ]dmwh OXJ quiinbuspaiignthecarprequiintinfrto-grepara v1atnout COD ign ]expoccha-vgaswhgastl ] thefro:dermahoiof (in 1gaswo:thitio:rettheapjdoamingasferacePit]thewo: The ArtizisDec. 1, 1866. Mersey Docks and Harbour. 267 running lengthwise, these being supported by a series of deck beams,14in. x 12in., placed at intervals of 3ft. The characteristic difference between this stage and t Stock Photohttps://www.alamy.com/image-license-details/?v=1https://www.alamy.com/the-artizan-ora-gtue-le-7h-rgt-!t-teit-y-!1-rsd-d-3f-it-sgtfleitlehitgtn-3t-irtod-d-id-gtf-itoko-d-d-udtooiotn-8o-e-a-i-the-artizan-dec-l7-1865-iiy-suss-m-hiakiyii-2-aftairact-seecor-dmwh-oxj-quiinbuspaiignthecarprequiintinfrto-grepara-v1atnout-cod-ign-expoccha-vgaswhgastl-thefrodermahoiof-in-1gaswothitiorettheapjdoamingasferacepit-thewo-the-artizisdec-1-1866-mersey-docks-and-harbour-267-running-lengthwise-these-being-supported-by-a-series-of-deck-beams14in-x-12in-placed-at-intervals-of-3ft-the-characteristic-difference-between-this-stage-and-t-image338470343.htmlRM2AJJJAF–The Artizan . ora->ue-le 7;h r> !t teit y !;1-:rsd d 3f it)-s>fleitle?hit>n 3t ir)t;od :d id >f itoko d d udtooiotn 8O e a i THE ARTIZAN DEC l?7 1865 ^iiY ©©suss m® [Hi/aKi©yii. 2( aft.airact seecor ]dmwh OXJ quiinbuspaiignthecarprequiintinfrto-grepara v1atnout COD ign ]expoccha-vgaswhgastl ] thefro:dermahoiof (in 1gaswo:thitio:rettheapjdoamingasferacePit]thewo: The ArtizisDec. 1, 1866. Mersey Docks and Harbour. 267 running lengthwise, these being supported by a series of deck beams,14in. x 12in., placed at intervals of 3ft. The characteristic difference between this stage and t
Model or Part of a 74-Gun Ship of the Line, Longitudinal cross section from the middle part of the hull of a ship, on a stand. The skin has been omitted and the model shows the construction with a diagonal connection according to Soetermeer's system on fifteen-part trusses. Four decks are indicated, two with diagonal warp in the web, the deck beams are supported by brass knees. The model has twenty one ports. 1:40 scale, De Ruyter (ship), Rijkswerf Vlissingen (possibly), Flushing (possibly), c. 1833, wood (plant material), brass (alloy), model: h 46.2 cm × w 65 cm × d 27 cm packaging capsule Stock Photohttps://www.alamy.com/image-license-details/?v=1https://www.alamy.com/model-or-part-of-a-74-gun-ship-of-the-line-longitudinal-cross-section-from-the-middle-part-of-the-hull-of-a-ship-on-a-stand-the-skin-has-been-omitted-and-the-model-shows-the-construction-with-a-diagonal-connection-according-to-soetermeers-system-on-fifteen-part-trusses-four-decks-are-indicated-two-with-diagonal-warp-in-the-web-the-deck-beams-are-supported-by-brass-knees-the-model-has-twenty-one-ports-140-scale-de-ruyter-ship-rijkswerf-vlissingen-possibly-flushing-possibly-c-1833-wood-plant-material-brass-alloy-model-h-462-cm-w-65-cm-d-27-cm-packaging-capsule-image261380474.htmlRMW56WCX–Model or Part of a 74-Gun Ship of the Line, Longitudinal cross section from the middle part of the hull of a ship, on a stand. The skin has been omitted and the model shows the construction with a diagonal connection according to Soetermeer's system on fifteen-part trusses. Four decks are indicated, two with diagonal warp in the web, the deck beams are supported by brass knees. The model has twenty one ports. 1:40 scale, De Ruyter (ship), Rijkswerf Vlissingen (possibly), Flushing (possibly), c. 1833, wood (plant material), brass (alloy), model: h 46.2 cm × w 65 cm × d 27 cm packaging capsule
Half Model of a Fireship, anonymous, 1770 - 1800 ship model. half model. builder's model Completely planks of a cheating model (starboard) of a one -mast flat bottom. The skin is partially left open to show the interior. Four levels: very low lower deck with flammable material spread over it; slightly higher a running corridor along the board and a gutter with flammable material to the lower deck; half -deck and baking deck supported by cover stans, a chimney on the baking deck; Upper Campanje. There are deck beams over the pit. A small gate in the fore ship, a large gate in the round stern; E Stock Photohttps://www.alamy.com/image-license-details/?v=1https://www.alamy.com/half-model-of-a-fireship-anonymous-1770-1800-ship-model-half-model-builders-model-completely-planks-of-a-cheating-model-starboard-of-a-one-mast-flat-bottom-the-skin-is-partially-left-open-to-show-the-interior-four-levels-very-low-lower-deck-with-flammable-material-spread-over-it-slightly-higher-a-running-corridor-along-the-board-and-a-gutter-with-flammable-material-to-the-lower-deck-half-deck-and-baking-deck-supported-by-cover-stans-a-chimney-on-the-baking-deck-upper-campanje-there-are-deck-beams-over-the-pit-a-small-gate-in-the-fore-ship-a-large-gate-in-the-round-stern-e-image590719499.htmlRM2W91GMY–Half Model of a Fireship, anonymous, 1770 - 1800 ship model. half model. builder's model Completely planks of a cheating model (starboard) of a one -mast flat bottom. The skin is partially left open to show the interior. Four levels: very low lower deck with flammable material spread over it; slightly higher a running corridor along the board and a gutter with flammable material to the lower deck; half -deck and baking deck supported by cover stans, a chimney on the baking deck; Upper Campanje. There are deck beams over the pit. A small gate in the fore ship, a large gate in the round stern; E
Model or Part of a 74-Gun Ship of the Line, Longitudinal cross section from the middle part of the hull of a ship, on a stand. The skin has been omitted and the model shows the construction with a diagonal connection according to Soetermeer's system on fifteen-part trusses. Four decks are indicated, two with diagonal warp in the web, the deck beams are supported by brass knees. The model has twenty one ports. 1:40 scale, De Ruyter (ship), Rijkswerf Vlissingen (possibly), Flushing (possibly), c. 1833, wood (plant material), brass (alloy), model: h 46.2 cm × w 65 cm × d 27 cm packaging capsule: Stock Photohttps://www.alamy.com/image-license-details/?v=1https://www.alamy.com/model-or-part-of-a-74-gun-ship-of-the-line-longitudinal-cross-section-from-the-middle-part-of-the-hull-of-a-ship-on-a-stand-the-skin-has-been-omitted-and-the-model-shows-the-construction-with-a-diagonal-connection-according-to-soetermeers-system-on-fifteen-part-trusses-four-decks-are-indicated-two-with-diagonal-warp-in-the-web-the-deck-beams-are-supported-by-brass-knees-the-model-has-twenty-one-ports-140-scale-de-ruyter-ship-rijkswerf-vlissingen-possibly-flushing-possibly-c-1833-wood-plant-material-brass-alloy-model-h-462-cm-w-65-cm-d-27-cm-packaging-capsule-image349984108.htmlRF2B9B48C–Model or Part of a 74-Gun Ship of the Line, Longitudinal cross section from the middle part of the hull of a ship, on a stand. The skin has been omitted and the model shows the construction with a diagonal connection according to Soetermeer's system on fifteen-part trusses. Four decks are indicated, two with diagonal warp in the web, the deck beams are supported by brass knees. The model has twenty one ports. 1:40 scale, De Ruyter (ship), Rijkswerf Vlissingen (possibly), Flushing (possibly), c. 1833, wood (plant material), brass (alloy), model: h 46.2 cm × w 65 cm × d 27 cm packaging capsule:
![. Abraham Lincoln and the battles of the Civil War . he cornersby three-inch bolts pas.sing through the iron-])lated deck and deck-beams. The wheel,which by means of ordinary tiller-ropes oper-ates the rudder, is placed within the pilot-house, its axle being supported by a bracketsecured to the iron blocks as shown by theillustration. An ordinary ladder resting on thebottom of the battery leads to the grated floorof the jMlot-house. In order to afford the com-manding officer and the pilot a clear view ofobjects before and on the sides of the battery,the first and second iron blocks from the to Stock Photo](https://c8.alamy.com/comp/2CGJ029/abraham-lincoln-and-the-battles-of-the-civil-war-he-cornersby-three-inch-bolts-passing-through-the-iron-lated-deck-and-deck-beams-the-wheelwhich-by-means-of-ordinary-tiller-ropes-oper-ates-the-rudder-is-placed-within-the-pilot-house-its-axle-being-supported-by-a-bracketsecured-to-the-iron-blocks-as-shown-by-theillustration-an-ordinary-ladder-resting-on-thebottom-of-the-battery-leads-to-the-grated-floorof-the-jmlot-house-in-order-to-afford-the-com-manding-officer-and-the-pilot-a-clear-view-ofobjects-before-and-on-the-sides-of-the-batterythe-first-and-second-iron-blocks-from-the-to-2CGJ029.jpg ". Abraham Lincoln and the battles of the Civil War . he cornersby three-inch bolts pas.sing through the iron-])lated deck and deck-beams. The wheel,which by means of ordinary tiller-ropes oper-ates the rudder, is placed within the pilot-house, its axle being supported by a bracketsecured to the iron blocks as shown by theillustration. An ordinary ladder resting on thebottom of the battery leads to the grated floorof the jMlot-house. In order to afford the com-manding officer and the pilot a clear view ofobjects before and on the sides of the battery,the first and second iron blocks from the to Stock Photo")
. Abraham Lincoln and the battles of the Civil War . he cornersby three-inch bolts pas.sing through the iron-])lated deck and deck-beams. The wheel,which by means of ordinary tiller-ropes oper-ates the rudder, is placed within the pilot-house, its axle being supported by a bracketsecured to the iron blocks as shown by theillustration. An ordinary ladder resting on thebottom of the battery leads to the grated floorof the jMlot-house. In order to afford the com-manding officer and the pilot a clear view ofobjects before and on the sides of the battery,the first and second iron blocks from the to Stock Photohttps://www.alamy.com/image-license-details/?v=1https://www.alamy.com/abraham-lincoln-and-the-battles-of-the-civil-war-he-cornersby-three-inch-bolts-passing-through-the-iron-lated-deck-and-deck-beams-the-wheelwhich-by-means-of-ordinary-tiller-ropes-oper-ates-the-rudder-is-placed-within-the-pilot-house-its-axle-being-supported-by-a-bracketsecured-to-the-iron-blocks-as-shown-by-theillustration-an-ordinary-ladder-resting-on-thebottom-of-the-battery-leads-to-the-grated-floorof-the-jmlot-house-in-order-to-afford-the-com-manding-officer-and-the-pilot-a-clear-view-ofobjects-before-and-on-the-sides-of-the-batterythe-first-and-second-iron-blocks-from-the-to-image371647425.htmlRM2CGJ029–. Abraham Lincoln and the battles of the Civil War . he cornersby three-inch bolts pas.sing through the iron-])lated deck and deck-beams. The wheel,which by means of ordinary tiller-ropes oper-ates the rudder, is placed within the pilot-house, its axle being supported by a bracketsecured to the iron blocks as shown by theillustration. An ordinary ladder resting on thebottom of the battery leads to the grated floorof the jMlot-house. In order to afford the com-manding officer and the pilot a clear view ofobjects before and on the sides of the battery,the first and second iron blocks from the to
Model of the Construction of a Timber Ship, Model of the cross-section of a midship ship, with three decks. One side is planked, as well as half of the upper deck, the other shows only the timber and beams. The hull shape is completely square, the bottom composed of two layers of straight beams supported by two keels, the floor beams protrude beyond the ship's wall, so that an edge is created at the bottom, which is flattened. The sides consist of vertical, wooden, planked on one side. Two knees with ten brass pins are arranged on one side in the crests, but these knees do not occur elsewhere Stock Photohttps://www.alamy.com/image-license-details/?v=1https://www.alamy.com/model-of-the-construction-of-a-timber-ship-model-of-the-cross-section-of-a-midship-ship-with-three-decks-one-side-is-planked-as-well-as-half-of-the-upper-deck-the-other-shows-only-the-timber-and-beams-the-hull-shape-is-completely-square-the-bottom-composed-of-two-layers-of-straight-beams-supported-by-two-keels-the-floor-beams-protrude-beyond-the-ships-wall-so-that-an-edge-is-created-at-the-bottom-which-is-flattened-the-sides-consist-of-vertical-wooden-planked-on-one-side-two-knees-with-ten-brass-pins-are-arranged-on-one-side-in-the-crests-but-these-knees-do-not-occur-elsewhere-image261380190.htmlRMW56W2P–Model of the Construction of a Timber Ship, Model of the cross-section of a midship ship, with three decks. One side is planked, as well as half of the upper deck, the other shows only the timber and beams. The hull shape is completely square, the bottom composed of two layers of straight beams supported by two keels, the floor beams protrude beyond the ship's wall, so that an edge is created at the bottom, which is flattened. The sides consist of vertical, wooden, planked on one side. Two knees with ten brass pins are arranged on one side in the crests, but these knees do not occur elsewhere
Half Model of a Paddle Steamer, anonymous, c. 1873 ship model. half model. builder's model Polychromed stacking model (starboard) of a one -mast paddle steam ship. Straight vertical pre -stem. Elliptical fence with rudder with round stirring king (American rudder) and rounded leaf. One closed wheel cabinet supported by rader beams in the side, a chimney on deck. De Zeeg runs a little to both ends; The underwater ship is a round truss with flat soil. The model only has a single breeding mast. On the back of the model forecast and water lines and notes for the yard. Scale 1:20 (scale on model). Stock Photohttps://www.alamy.com/image-license-details/?v=1https://www.alamy.com/half-model-of-a-paddle-steamer-anonymous-c-1873-ship-model-half-model-builders-model-polychromed-stacking-model-starboard-of-a-one-mast-paddle-steam-ship-straight-vertical-pre-stem-elliptical-fence-with-rudder-with-round-stirring-king-american-rudder-and-rounded-leaf-one-closed-wheel-cabinet-supported-by-rader-beams-in-the-side-a-chimney-on-deck-de-zeeg-runs-a-little-to-both-ends-the-underwater-ship-is-a-round-truss-with-flat-soil-the-model-only-has-a-single-breeding-mast-on-the-back-of-the-model-forecast-and-water-lines-and-notes-for-the-yard-scale-120-scale-on-model-image590726335.htmlRM2W91WD3–Half Model of a Paddle Steamer, anonymous, c. 1873 ship model. half model. builder's model Polychromed stacking model (starboard) of a one -mast paddle steam ship. Straight vertical pre -stem. Elliptical fence with rudder with round stirring king (American rudder) and rounded leaf. One closed wheel cabinet supported by rader beams in the side, a chimney on deck. De Zeeg runs a little to both ends; The underwater ship is a round truss with flat soil. The model only has a single breeding mast. On the back of the model forecast and water lines and notes for the yard. Scale 1:20 (scale on model).
Half Model of a Paddle Steamer.Polychromed stack model (starboard) of a one-mast paddle steam ship. Straight vertical venture. Elliptical fence with stir with round robe (American rudder) and rounded leaf. One closed radio cupboard supported by paddle beams in the side, a chimney on deck. The seam runs a little to both ends; The underwater ship is a round trip with flat bottom. The model only has a single fokkast. On the back of the model and water lines and notes for the yard. Scale 1:20 (Scale by model). Stock Photohttps://www.alamy.com/image-license-details/?v=1https://www.alamy.com/half-model-of-a-paddle-steamerpolychromed-stack-model-starboard-of-a-one-mast-paddle-steam-ship-straight-vertical-venture-elliptical-fence-with-stir-with-round-robe-american-rudder-and-rounded-leaf-one-closed-radio-cupboard-supported-by-paddle-beams-in-the-side-a-chimney-on-deck-the-seam-runs-a-little-to-both-ends-the-underwater-ship-is-a-round-trip-with-flat-bottom-the-model-only-has-a-single-fokkast-on-the-back-of-the-model-and-water-lines-and-notes-for-the-yard-scale-120-scale-by-model-image414367789.htmlRM2F2429H–Half Model of a Paddle Steamer.Polychromed stack model (starboard) of a one-mast paddle steam ship. Straight vertical venture. Elliptical fence with stir with round robe (American rudder) and rounded leaf. One closed radio cupboard supported by paddle beams in the side, a chimney on deck. The seam runs a little to both ends; The underwater ship is a round trip with flat bottom. The model only has a single fokkast. On the back of the model and water lines and notes for the yard. Scale 1:20 (Scale by model).
Model of the Construction of a Timber Ship, Model of the cross-section of a midship ship, with three decks. One side is planked, as well as half of the upper deck, the other shows only the timber and beams. The hull shape is completely square, the bottom composed of two layers of straight beams supported by two keels, the floor beams protrude beyond the ship's wall, so that an edge is created at the bottom, which is flattened. The sides consist of vertical, wooden, planked on one side. Two knees with ten brass pins are arranged on one side in the crests, but these knees do not occur elsewhere Stock Photohttps://www.alamy.com/image-license-details/?v=1https://www.alamy.com/model-of-the-construction-of-a-timber-ship-model-of-the-cross-section-of-a-midship-ship-with-three-decks-one-side-is-planked-as-well-as-half-of-the-upper-deck-the-other-shows-only-the-timber-and-beams-the-hull-shape-is-completely-square-the-bottom-composed-of-two-layers-of-straight-beams-supported-by-two-keels-the-floor-beams-protrude-beyond-the-ships-wall-so-that-an-edge-is-created-at-the-bottom-which-is-flattened-the-sides-consist-of-vertical-wooden-planked-on-one-side-two-knees-with-ten-brass-pins-are-arranged-on-one-side-in-the-crests-but-these-knees-do-not-occur-elsewhere-image349983846.htmlRF2B9B3Y2–Model of the Construction of a Timber Ship, Model of the cross-section of a midship ship, with three decks. One side is planked, as well as half of the upper deck, the other shows only the timber and beams. The hull shape is completely square, the bottom composed of two layers of straight beams supported by two keels, the floor beams protrude beyond the ship's wall, so that an edge is created at the bottom, which is flattened. The sides consist of vertical, wooden, planked on one side. Two knees with ten brass pins are arranged on one side in the crests, but these knees do not occur elsewhere
Model of A Hull Section at the Main Frame. Model of a cross-section of a hull at the large trail over the length of four trusses, from outside blanked and grew from inside. The Kiel is composed of inner ware, empty keel and shelves against the sides. The seed wood has been replaced by two bars. The trusses consist of fifteen parts. The deck beams are supported on one side by wooden knees, on the other by art knees. Stock Photohttps://www.alamy.com/image-license-details/?v=1https://www.alamy.com/model-of-a-hull-section-at-the-main-frame-model-of-a-cross-section-of-a-hull-at-the-large-trail-over-the-length-of-four-trusses-from-outside-blanked-and-grew-from-inside-the-kiel-is-composed-of-inner-ware-empty-keel-and-shelves-against-the-sides-the-seed-wood-has-been-replaced-by-two-bars-the-trusses-consist-of-fifteen-parts-the-deck-beams-are-supported-on-one-side-by-wooden-knees-on-the-other-by-art-knees-image430878899.htmlRM2G106C3–Model of A Hull Section at the Main Frame. Model of a cross-section of a hull at the large trail over the length of four trusses, from outside blanked and grew from inside. The Kiel is composed of inner ware, empty keel and shelves against the sides. The seed wood has been replaced by two bars. The trusses consist of fifteen parts. The deck beams are supported on one side by wooden knees, on the other by art knees.
Model of A Chain Pump. Model of the cross section of a ship near the large mast, with four decks and a chain pump. The pump consists of a chain of buckets that are passed along a pump tube until the keel and rise along another tube; On the upper deck they go over a pentagonal wheel, which is driven by a stool and flywheel. The four decks are partially blanked and are supported by deck beams, which are equipped with eight different hollow metal knees: some are on the wooden knee that they cover, others on the road, some in the deckbar, others in the deckboards. Scale 1:20 (according to Obeenen) Stock Photohttps://www.alamy.com/image-license-details/?v=1https://www.alamy.com/model-of-a-chain-pump-model-of-the-cross-section-of-a-ship-near-the-large-mast-with-four-decks-and-a-chain-pump-the-pump-consists-of-a-chain-of-buckets-that-are-passed-along-a-pump-tube-until-the-keel-and-rise-along-another-tube-on-the-upper-deck-they-go-over-a-pentagonal-wheel-which-is-driven-by-a-stool-and-flywheel-the-four-decks-are-partially-blanked-and-are-supported-by-deck-beams-which-are-equipped-with-eight-different-hollow-metal-knees-some-are-on-the-wooden-knee-that-they-cover-others-on-the-road-some-in-the-deckbar-others-in-the-deckboards-scale-120-according-to-obeenen-image431550312.htmlRM2G22PR4–Model of A Chain Pump. Model of the cross section of a ship near the large mast, with four decks and a chain pump. The pump consists of a chain of buckets that are passed along a pump tube until the keel and rise along another tube; On the upper deck they go over a pentagonal wheel, which is driven by a stool and flywheel. The four decks are partially blanked and are supported by deck beams, which are equipped with eight different hollow metal knees: some are on the wooden knee that they cover, others on the road, some in the deckbar, others in the deckboards. Scale 1:20 (according to Obeenen)
. Electric railway journal . storage lockers provided with sliding doors and locks.Above the serving tables on both sides of the buffet are rowsof lockers with sliding doors and provision for storing dishes.A water cooler has been built on the buffet serving table. Thiscooler is 12 in. x 8 in. in section and 24 in. high. Two galva-nized-iron tanks for water storage, supported by iron bandsattached to the upper deck carlins, supply all of the water forthe car. BODY CONSTRUCTION The car body of this interesting car is carried on an under-frame which includes four 6-in. I-beams and two channel se Stock Photohttps://www.alamy.com/image-license-details/?v=1https://www.alamy.com/electric-railway-journal-storage-lockers-provided-with-sliding-doors-and-locksabove-the-serving-tables-on-both-sides-of-the-buffet-are-rowsof-lockers-with-sliding-doors-and-provision-for-storing-dishesa-water-cooler-has-been-built-on-the-buffet-serving-table-thiscooler-is-12-in-x-8-in-in-section-and-24-in-high-two-galva-nized-iron-tanks-for-water-storage-supported-by-iron-bandsattached-to-the-upper-deck-carlins-supply-all-of-the-water-forthe-car-body-construction-the-car-body-of-this-interesting-car-is-carried-on-an-under-frame-which-includes-four-6-in-i-beams-and-two-channel-se-image375822473.htmlRM2CRC5B5–. Electric railway journal . storage lockers provided with sliding doors and locks.Above the serving tables on both sides of the buffet are rowsof lockers with sliding doors and provision for storing dishes.A water cooler has been built on the buffet serving table. Thiscooler is 12 in. x 8 in. in section and 24 in. high. Two galva-nized-iron tanks for water storage, supported by iron bandsattached to the upper deck carlins, supply all of the water forthe car. BODY CONSTRUCTION The car body of this interesting car is carried on an under-frame which includes four 6-in. I-beams and two channel se
Model of the BOW of AN 84-gun ship of the Line. Technical model that demonstrates the construction with Sir Robert Seppings crucifixes, on stacking blocks on a base plank. Forter ship with two crane beams and four clamp plates, which are between horizontal tires. Curved venture, winding around. Koebrug deck, two gunpacks and baking deck: The upper three decks have a diagonal shing in the web, the deck beams are supported by brass knees. Beting on the lower gun deck. Thirteen-part trusses with a cross bandage. No skin, but sents. A number of braces are missing. Pendant of NG-MC-97. Scale 1:40 ( Stock Photohttps://www.alamy.com/image-license-details/?v=1https://www.alamy.com/model-of-the-bow-of-an-84-gun-ship-of-the-line-technical-model-that-demonstrates-the-construction-with-sir-robert-seppings-crucifixes-on-stacking-blocks-on-a-base-plank-forter-ship-with-two-crane-beams-and-four-clamp-plates-which-are-between-horizontal-tires-curved-venture-winding-around-koebrug-deck-two-gunpacks-and-baking-deck-the-upper-three-decks-have-a-diagonal-shing-in-the-web-the-deck-beams-are-supported-by-brass-knees-beting-on-the-lower-gun-deck-thirteen-part-trusses-with-a-cross-bandage-no-skin-but-sents-a-number-of-braces-are-missing-pendant-of-ng-mc-97-scale-140-image430881316.htmlRM2G109EC–Model of the BOW of AN 84-gun ship of the Line. Technical model that demonstrates the construction with Sir Robert Seppings crucifixes, on stacking blocks on a base plank. Forter ship with two crane beams and four clamp plates, which are between horizontal tires. Curved venture, winding around. Koebrug deck, two gunpacks and baking deck: The upper three decks have a diagonal shing in the web, the deck beams are supported by brass knees. Beting on the lower gun deck. Thirteen-part trusses with a cross bandage. No skin, but sents. A number of braces are missing. Pendant of NG-MC-97. Scale 1:40 (
Model of a Chain Pump, Model of the cross-section of a ship at the height of the large mast, with four decks and a chain pump. The pump consists of a chain of buckets that are guided down a pump tube down to the keel and come up again along another tube, on the upper deck they go over a pentagonal wheel that is driven by a crank and flywheel. The four decks are partially planked and supported by deck beams that feature eight different hollow metal knees: some are nailed to the wooden knee that they cover, others to the weighing, some to the deck beam, others to the deck boards. 1:20 scale Stock Photohttps://www.alamy.com/image-license-details/?v=1https://www.alamy.com/model-of-a-chain-pump-model-of-the-cross-section-of-a-ship-at-the-height-of-the-large-mast-with-four-decks-and-a-chain-pump-the-pump-consists-of-a-chain-of-buckets-that-are-guided-down-a-pump-tube-down-to-the-keel-and-come-up-again-along-another-tube-on-the-upper-deck-they-go-over-a-pentagonal-wheel-that-is-driven-by-a-crank-and-flywheel-the-four-decks-are-partially-planked-and-supported-by-deck-beams-that-feature-eight-different-hollow-metal-knees-some-are-nailed-to-the-wooden-knee-that-they-cover-others-to-the-weighing-some-to-the-deck-beam-others-to-the-deck-boards-120-scale-image261381724.htmlRMW56Y1G–Model of a Chain Pump, Model of the cross-section of a ship at the height of the large mast, with four decks and a chain pump. The pump consists of a chain of buckets that are guided down a pump tube down to the keel and come up again along another tube, on the upper deck they go over a pentagonal wheel that is driven by a crank and flywheel. The four decks are partially planked and supported by deck beams that feature eight different hollow metal knees: some are nailed to the wooden knee that they cover, others to the weighing, some to the deck beam, others to the deck boards. 1:20 scale
Model of a Chain Pump, Model of the cross-section of a ship at the height of the large mast, with four decks and a chain pump. The pump consists of a chain of buckets that are guided down a pump tube down to the keel and come up again along another tube, on the upper deck they go over a pentagonal wheel that is driven by a crank and flywheel. The four decks are partially planked and supported by deck beams that feature eight different hollow metal knees: some are nailed to the wooden knee that they cover, others to the weighing, some to the deck beam, others to the deck boards. 1:20 scale (acc Stock Photohttps://www.alamy.com/image-license-details/?v=1https://www.alamy.com/model-of-a-chain-pump-model-of-the-cross-section-of-a-ship-at-the-height-of-the-large-mast-with-four-decks-and-a-chain-pump-the-pump-consists-of-a-chain-of-buckets-that-are-guided-down-a-pump-tube-down-to-the-keel-and-come-up-again-along-another-tube-on-the-upper-deck-they-go-over-a-pentagonal-wheel-that-is-driven-by-a-crank-and-flywheel-the-four-decks-are-partially-planked-and-supported-by-deck-beams-that-feature-eight-different-hollow-metal-knees-some-are-nailed-to-the-wooden-knee-that-they-cover-others-to-the-weighing-some-to-the-deck-beam-others-to-the-deck-boards-120-scale-acc-image349985178.htmlRF2B9B5JJ–Model of a Chain Pump, Model of the cross-section of a ship at the height of the large mast, with four decks and a chain pump. The pump consists of a chain of buckets that are guided down a pump tube down to the keel and come up again along another tube, on the upper deck they go over a pentagonal wheel that is driven by a crank and flywheel. The four decks are partially planked and supported by deck beams that feature eight different hollow metal knees: some are nailed to the wooden knee that they cover, others to the weighing, some to the deck beam, others to the deck boards. 1:20 scale (acc
Half Model of a Paddle Steamer, Polychrome stacked model (starboard) of a single-masted paddle steamer. Straight vertical bow. Elliptical fence with rudder with round rudder (American rudder) and rounded leaf. One closed gearbox supported by beams in the side, a chimney on deck. The sheer rises slightly to both ends, the underwater ship is a round truss with a flat bottom. The model only has a single breeding mast. On the back of the model truss and water lines and notes for the yard. 1:20 scale (scale on model)., Bogor (ship), anonymous, Surabaya (possibly), c. 1873, wood (plant material) Stock Photohttps://www.alamy.com/image-license-details/?v=1https://www.alamy.com/half-model-of-a-paddle-steamer-polychrome-stacked-model-starboard-of-a-single-masted-paddle-steamer-straight-vertical-bow-elliptical-fence-with-rudder-with-round-rudder-american-rudder-and-rounded-leaf-one-closed-gearbox-supported-by-beams-in-the-side-a-chimney-on-deck-the-sheer-rises-slightly-to-both-ends-the-underwater-ship-is-a-round-truss-with-a-flat-bottom-the-model-only-has-a-single-breeding-mast-on-the-back-of-the-model-truss-and-water-lines-and-notes-for-the-yard-120-scale-scale-on-model-bogor-ship-anonymous-surabaya-possibly-c-1873-wood-plant-material-image261380868.htmlRMW56WY0–Half Model of a Paddle Steamer, Polychrome stacked model (starboard) of a single-masted paddle steamer. Straight vertical bow. Elliptical fence with rudder with round rudder (American rudder) and rounded leaf. One closed gearbox supported by beams in the side, a chimney on deck. The sheer rises slightly to both ends, the underwater ship is a round truss with a flat bottom. The model only has a single breeding mast. On the back of the model truss and water lines and notes for the yard. 1:20 scale (scale on model)., Bogor (ship), anonymous, Surabaya (possibly), c. 1873, wood (plant material)
Half Model of a Paddle Steamer, Polychrome stacked model (starboard) of a single-masted paddle steamer. Straight vertical bow. Elliptical fence with rudder with round rudder (American rudder) and rounded leaf. One closed gearbox supported by beams in the side, a chimney on deck. The sheer rises slightly to both ends, the underwater ship is a round truss with a flat bottom. The model only has a single breeding mast. On the back of the model truss and water lines and notes for the yard. 1:20 scale (scale on model)., Bogor (ship), anonymous, Surabaya (possibly), c. 1873, wood (plant material), h Stock Photohttps://www.alamy.com/image-license-details/?v=1https://www.alamy.com/half-model-of-a-paddle-steamer-polychrome-stacked-model-starboard-of-a-single-masted-paddle-steamer-straight-vertical-bow-elliptical-fence-with-rudder-with-round-rudder-american-rudder-and-rounded-leaf-one-closed-gearbox-supported-by-beams-in-the-side-a-chimney-on-deck-the-sheer-rises-slightly-to-both-ends-the-underwater-ship-is-a-round-truss-with-a-flat-bottom-the-model-only-has-a-single-breeding-mast-on-the-back-of-the-model-truss-and-water-lines-and-notes-for-the-yard-120-scale-scale-on-model-bogor-ship-anonymous-surabaya-possibly-c-1873-wood-plant-material-h-image349984394.htmlRF2B9B4JJ–Half Model of a Paddle Steamer, Polychrome stacked model (starboard) of a single-masted paddle steamer. Straight vertical bow. Elliptical fence with rudder with round rudder (American rudder) and rounded leaf. One closed gearbox supported by beams in the side, a chimney on deck. The sheer rises slightly to both ends, the underwater ship is a round truss with a flat bottom. The model only has a single breeding mast. On the back of the model truss and water lines and notes for the yard. 1:20 scale (scale on model)., Bogor (ship), anonymous, Surabaya (possibly), c. 1873, wood (plant material), h
